rsIpsecSaEspInAuthAlg
RAPID-IPSEC-SA-MON-MIB-EXT ·
.1.3.6.1.4.1.4355.3.1.1.1.1.14
Object
column
IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAuthAlgorithm
A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used.
Context
- MIB
- RAPID-IPSEC-SA-MON-MIB-EXT
- OID
.1.3.6.1.4.1.4355.3.1.1.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rsIpsecSaEspInEntry
- Table
- rsIpsecSaEspInTable
- Siblings
- 25
Syntax
IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAuthAlgorithm
- Source
- IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAuthAlgorithm
- Base type
Enumeration
Values & Constraints
Type Values
0 | reserved |
1 | hmacMd5 |
2 | hmacSha |
3 | desMac |
4 | kpdk |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rsIpsecSaEspInAddress The destination address of the SA.
For implementations that do not support IPv6, this address
should appear as one of the IPv4-mapped IPv6 addresses as
defined in S… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4355.3.1.1.1.1.1 |
| rsIpsecSaEspInCreator The creator of this SA.
This MIB makes no assumptions about how the SAs are created.
They may be created statically, or by a key exchange
protocol such as IKE, or b… | column | IpsecSaCreatorIdent | .1.3.6.1.4.1.4355.3.1.1.1.1.10 |
| rsIpsecSaEspInEncapsulation The type of encapsulation used by this SA. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEncapsulationMode | .1.3.6.1.4.1.4355.3.1.1.1.1.11 |
| rsIpsecSaEspInEncAlg A unique value representing the encryption algorithm
applied to traffic or 0 if there is no encryption used. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEspTransform | .1.3.6.1.4.1.4355.3.1.1.1.1.12 |
| rsIpsecSaEspInEncKeyLength The length of the encryption key in bits used for the
algorithm specified in the 'rsIpsecSaEspInEncAlg' object, or 0
if the key length is implicit in the specified algorithm or
th… | column | bits Integer32 | .1.3.6.1.4.1.4355.3.1.1.1.1.13 |
| rsIpsecSaEspInLimitSeconds The maximum lifetime in seconds of the SA, or 0 if there is
no time constraint on its expiration.
The display value is limited to 4294967295 seconds (more
than 136 years); values … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.1.1.15 |
| rsIpsecSaEspInLimitKbytes The maximum traffic in kilobytes that the SA is allowed to
support, or 0 if there is no traffic constraint on its
expiration.
The display value is limited to 429496… | column | kilobytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.1.1.16 |
| rsIpsecSaEspInAccSeconds The number of seconds accumulated against the SA's
expiration by time.
This is also the number of seconds that the SA has existed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.17 |
| rsIpsecSaEspInAccKbytes The amount of traffic accumulated that counts against the
SA's expiration by traffic limitation, measured in Kbytes.
This value may be 0 if the SA does not expire b… | column | kilobytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.18 |
| rsIpsecSaEspInUserOctets The amount of user level traffic measured in bytes handled
by the SA.
This is not necessarily the same as the amount of traffic
applied against the traffic expirati… | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.19 |
| rsIpsecSaEspInSpi The security parameters index of the SA. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.1.1.2 |
| rsIpsecSaEspInPackets The number of packets handled by the SA. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.20 |
| rsIpsecSaEspInDecryptErrors The number of packets discarded by the SA due to decryption
errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.21 |
| rsIpsecSaEspInAuthErrors The number of packets discarded by the SA due to
authentication errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.22 |
| rsIpsecSaEspInReplayErrors The number of packets discarded by the SA due to replay
errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.23 |
| rsIpsecSaEspInPolicyErrors The number of packets discarded by the SA due to policy
errors. This includes packets where the next protocol is
invalid. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.24 |
| rsIpsecSaEspInPadErrors The number of packets discarded by the SA due to pad value
errors.
Implementations that do not check this must not support this
object. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.25 |
| rsIpsecSaEspInOtherReceiveErrors The number of packets discarded by the SA due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.1.1.26 |
| rsIpsecSaEspInDestId The destination identifier of the SA, or 0 if unknown or if
the SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
tha… | column | OctetString | .1.3.6.1.4.1.4355.3.1.1.1.1.3 |
| rsIpsecSaEspInDestIdType The type of identifier presented by 'rsIpsecSaEspInDestId',
or 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.4.1.4355.3.1.1.1.1.4 |
| rsIpsecSaEspInSourceId The source identifier of the SA, or 0 if unknown or if the
SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
that are… | column | OctetString | .1.3.6.1.4.1.4355.3.1.1.1.1.5 |
| rsIpsecSaEspInSourceIdType The type of identifier presented by 'rsIpsecSaEspInSourceId',
or 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.4.1.4355.3.1.1.1.1.6 |
| rsIpsecSaEspInProtocol The transport-layer protocol number that this SA carries,
or 0 if it carries any protocol. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.1.1.7 |
| rsIpsecSaEspInDestPort The destination port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.1.1.8 |
| rsIpsecSaEspInSourcePort The source port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.1.1.9 |