rsIpsecSaAhInSourceId
RAPID-IPSEC-SA-MON-MIB-EXT ·
.1.3.6.1.4.1.4355.3.1.1.2.1.5
Object
column
OctetString
The source identifier of the SA, or 0 if unknown or if the
SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
that are exchange during SA creation negotiation.
Context
- MIB
- RAPID-IPSEC-SA-MON-MIB-EXT
- OID
.1.3.6.1.4.1.4355.3.1.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rsIpsecSaAhInEntry
- Table
- rsIpsecSaAhInTable
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rsIpsecSaAhInAddress The destination address of the SA.
For implementations that do not support IPv6, this address
should appear as one of the IPv4-mapped IPv6 addresses as
defined in S… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4355.3.1.1.2.1.1 |
| rsIpsecSaAhInCreator The creator of this SA.
This MIB makes no assumptions about how the SAs are created.
They may be created statically, or by a key exchange
protocol such as IKE, or b… | column | IpsecSaCreatorIdent | .1.3.6.1.4.1.4355.3.1.1.2.1.10 |
| rsIpsecSaAhInEncapsulation The type of encapsulation used by this SA. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiEncapsulationMode | .1.3.6.1.4.1.4355.3.1.1.2.1.11 |
| rsIpsecSaAhInAuthAlg A unique value representing the hash algorithm applied to
traffic carried by this SA if it uses ESP or 0 if there is
no authentication applied by ESP. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiAhTransform | .1.3.6.1.4.1.4355.3.1.1.2.1.12 |
| rsIpsecSaAhInLimitSeconds The maximum lifetime in seconds of the SA, or 0 if there is
no time constraint on its expiration.
The display value is limited to 4294967295 seconds (more
than 136 … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.2.1.13 |
| rsIpsecSaAhInLimitKbytes The maximum traffic in Kbytes that the SA is allowed to
support, or 0 if there is no traffic constraint on its
expiration.
The display value is limited to 429496729… | column | kilobytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.2.1.14 |
| rsIpsecSaAhInAccSeconds The number of seconds accumulated against the SA's
expiration by time.
This is also the number of seconds that the SA has existed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.15 |
| rsIpsecSaAhInAccKbytes The amount of traffic accumulated that counts against the
SA's expiration by traffic limitation, measured in Kbytes.
This value may be 0 if the SA does not expire based on
traffic. | column | kilobytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.16 |
| rsIpsecSaAhInUserOctets The amount of user level traffic measured in bytes handled
by the SA.
This is not necessarily the same as the amount of traffic
applied against the traffic expirati… | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.17 |
| rsIpsecSaAhInPackets The number of packets handled by the SA. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.18 |
| rsIpsecSaAhInAuthErrors The number of packets discarded by the SA due to
authentication errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.19 |
| rsIpsecSaAhInSpi The security parameters index of the SA. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4355.3.1.1.2.1.2 |
| rsIpsecSaAhInReplayErrors The number of packets discarded by the SA due to replay
errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.20 |
| rsIpsecSaAhInPolicyErrors The number of packets discarded by the SA due to policy
errors. This includes packets where the next protocol is
invalid. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.21 |
| rsIpsecSaAhInOtherReceiveErrors The number of packets discarded by the SA due to errors
other than decryption, authentication or replay errors. This
may include packets dropped due to a lack of receive
buffers, … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4355.3.1.1.2.1.22 |
| rsIpsecSaAhInDestId The destination identifier of the SA, or 0 if unknown or if
the SA uses transport mode encapsulation.
This value is taken directly from the optional ID payloads
tha… | column | OctetString | .1.3.6.1.4.1.4355.3.1.1.2.1.3 |
| rsIpsecSaAhInDestIdType The type of identifier presented by 'rsIpsecSaAhInDestId', or
0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.4.1.4355.3.1.1.2.1.4 |
| rsIpsecSaAhInSourceIdType The type of identifier presented by 'rsIpsecSaAhInSourceId',
or 0 if unknown or if the SA uses transport mode
encapsulation. | column | IPSEC-ISAKMP-IKE-DOI-TCIpsecDoiIdentType | .1.3.6.1.4.1.4355.3.1.1.2.1.6 |
| rsIpsecSaAhInProtocol The transport-layer protocol number that this SA carries,
or 0 if it carries any protocol. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.2.1.7 |
| rsIpsecSaAhInDestPort The destination port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.2.1.8 |
| rsIpsecSaAhInSourcePort The source port number of the protocol that this SA
carries, or 0 if it carries any port number. | column | Integer32 | .1.3.6.1.4.1.4355.3.1.1.2.1.9 |