rcVrrpOperAdvertisementInterval
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.73.1.1.2.1.13
Object
column
r/w
Integer32
This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.73.1.1.2.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcVrrpOperEntry
- Table
- rcVrrpOperTable
- Siblings
- 25
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcVrrpOperIfIndex port interface index. | column | InterfaceIndexOrZero | .1.3.6.1.4.1.2272.1.73.1.1.2.1.1 |
| rcVrrpOperAuthType Authentication type used for VRRP protocol exchanges between
virtual routers. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.10 |
| rcVrrpOperAuthKey The Authentication Key. If the virtual router's Authorization
Type is 'simpleTextPassword', and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
… | column | OctetString | .1.3.6.1.4.1.2272.1.73.1.1.2.1.11 |
| rcVrrpOperHMACMD5Key The Authentication Key. If the virtual router's 'Authorization
Type' is 'ipAuthenticationHeader', and the key length is shorter
than 16 octets, the agent will left adjust and zer… | column | OctetString | .1.3.6.1.4.1.2272.1.73.1.1.2.1.12 |
| rcVrrpOperPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.14 |
| rcVrrpOperVirtualRouterUpTime This is the time interval (in hundredths of a second)
since this virtual router was initialized. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.73.1.1.2.1.15 |
| rcVrrpOperRowStatus The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to 'createAndGo' results in enabling the VRRP
protocol for… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.73.1.1.2.1.16 |
| rcVrrpOperCriticalIpAddr IP address of the interface that will cause a
shutdown event. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.17 |
| rcVrrpOperHoldDownTimer Used to configure the amount of time (in seconds)
to wait before preempting the current vrrp master. | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.18 |
| rcVrrpOperHoldDownState Used to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.19 |
| rcVrrpOperVrId This object contains the Virtual Router Identifier (VRID). | column | VRRP-MIBVrId | .1.3.6.1.4.1.2272.1.73.1.1.2.1.2 |
| rcVrrpOperHoldDownTimeRemaining Used to indicate the amount of time (in seconds)
left before the rcVrrpOperHoldDownTimer will expire. | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.20 |
| rcVrrpOperAction Used to trigger an action on this vrrp interface. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.21 |
| rcVrrpOperCriticalIpAddrEnable Indicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (0.0.0.0).
No effect if an user-defined IP address does not exist. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.73.1.1.2.1.22 |
| rcVrrpOperBackUpMaster Enable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the time of SMLT. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.23 |
| rcVrrpOperBackUpMasterState Indicate whether backup VRRP switch traffic forwarding is enabled or not. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.24 |
| rcVrrpOperFasterAdvInterval This is the faster advertisement interval, in
milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisem… | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.25 |
| rcVrrpOperFasterAdvIntervalEnable Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.26 |
| rcVrrpOperIpAddr The assigned IP addresses that a virtual router is responsible
for backing up. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.3 |
| rcVrrpOperVirtualMacAddr The virtual MAC address of the virtual router. This is derived
as follows: 00-00-5E-00-01-<VRID>.
Where the first three octets consist of the IANA's OUI; The
next t… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.4 |
| rcVrrpOperState The current state of the virtual router. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.5 |
| rcVrrpOperControl This object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the valu… | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.6 |
| rcVrrpOperPriority This object specifies the priority for the virtual
router (e.g., master election) with respect to other
virtual routers that are backing up a one or more
associated IP addresses. … | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.7 |
| rcVrrpOperIpAddrCount The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/… | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.8 |
| rcVrrpOperMasterIpAddr The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.9 |