rcOspfv3IfDemandNbrProbeInterval
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.67.1.1.7.1.26
Object
Defines how often the neighbor will be probed.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.67.1.1.7.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- rcOspfv3IfEntry
- Table
- rcOspfv3IfTable
- Siblings
- 25
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcOspfv3IfIndex The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.67.1.1.7.1.1 |
| rcOspfv3IfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.10 |
| rcOspfv3IfState The OSPFv3 Interface State. | column | Enumeration | .1.3.6.1.4.1.2272.1.67.1.1.7.1.11 |
| rcOspfv3IfDesignatedRouter The Router ID of the Designated Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.67.1.1.7.1.12 |
| rcOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated
Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.67.1.1.7.1.14 |
| rcOspfv3IfEvents The number of times this OSPF interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.15 |
| rcOspfv3IfStatus This variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6]. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.67.1.1.7.1.17 |
| rcOspfv3IfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is n… | column | Enumeration | .1.3.6.1.4.1.2272.1.67.1.1.7.1.18 |
| rcOspfv3IfDemand Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.67.1.1.7.1.19 |
| rcOspfv3IfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.67.1.1.7.1.2 |
| rcOspfv3IfMetricValue The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
rcOspfv3Referenc… | column | Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.20 |
| rcOspfv3IfLinkScopeLsaCount The total number of Link-Scope link-state
advertisements in this link's link-state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.21 |
| rcOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.22 |
| rcOspfv3IfInstId Enables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.23 |
| rcOspfv3IfDemandNbrProbe Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.67.1.1.7.1.24 |
| rcOspfv3IfDemandNbrProbeRetxLimit The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.25 |
| rcOspfv3IfBfdEnable Used to enable/disable BFD for OSPFv3. | column | EnableValue | .1.3.6.1.4.1.2272.1.67.1.1.7.1.27 |
| rcOspfv3IfLinkLsaSuppression Used to enable/disable link lsa suppression for OSPFv3. | column | EnableValue | .1.3.6.1.4.1.2272.1.67.1.1.7.1.28 |
| rcOspfv3IfType The OSPFv3 interface type. | column | Enumeration | .1.3.6.1.4.1.2272.1.67.1.1.7.1.3 |
| rcOspfv3IfAdminStat The OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disab… | column | Enumeration | .1.3.6.1.4.1.2272.1.67.1.1.7.1.4 |
| rcOspfv3IfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is… | column | Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.5 |
| rcOspfv3IfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | seconds Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.6 |
| rcOspfv3IfRetransInterval The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting databa… | column | seconds Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.7 |
| rcOspfv3IfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network. | column | seconds Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.8 |
| rcOspfv3IfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello inte… | column | seconds Integer32 | .1.3.6.1.4.1.2272.1.67.1.1.7.1.9 |