rcMltNtStgEnable
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.17.10.1.20
Object
Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.17.10.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcMltEntry
- Table
- rcMltTable
- Siblings
- 48
Values & Constraints
Enumerated Values
1 | noAction |
2 | install |
3 | uninstall |
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMltId A value that uniquely identifies the Multi-Link
Trunk associated with this entry. | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.1 |
| rcMltDistributionAlgorithm none(1), ... It will be fill later | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.10 |
| rcMltIfIndex Used to indicate the 'logical' ifIndex assigned to
this MLT. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.17.10.1.11 |
| rcMltMltType MLT type. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.12 |
| rcMltSmltId Split MLT id. | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.13 |
| rcMltRunningType Split MLT running type. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.14 |
| rcMltSvlanPortType Set MLT port type. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.15 |
| rcMltMulticastDistribution Enable/Disable multicast distribution per mlt. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.16 |
| rcMltLacp10gBackup Enable/Disable 10G Mlt reliance backup mode. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.17 |
| rcMltAggregatable Enable/Disable link aggregation on a MLT. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.18 |
| rcMltClearLinkAggregate clear link aggregate, equivalent to disable and
re-enable aggregatable on the MLT. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.19 |
| rcMltName An administratively-assigned name for this MLT. | column | OctetString | .1.3.6.1.4.1.2272.1.17.10.1.2 |
| rcMltDesignatedPort Indicates the Designated port for the MLT. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.17.10.1.21 |
| rcMltAggOperState Link aggregation state on a MLT. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.22 |
| rcMltAggTimeOfLastOperChange The time value since the interface entered its
current operational state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.17.10.1.23 |
| rcMltVplsMgmtVlan Management Vlan is configured on this mlt | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.24 |
| rcMltLoadDistributionOption Used to specify the Load Balancing option for MLT in UNI | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.25 |
| rcMltUniAggrMacIdx Used to specify the index of the mac address pool reserved for MLT uni | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.26 |
| rcMltUniAggrMacAddress Used to display the mac address reserved for this MLT | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.17.10.1.27 |
| rcMltQinqEtherType The qinq ether type value. It should be displayed
and input as Hex value. It would only be used when
MLT is associated with QnQ service UNI. Otherwise,
it would be ignored | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.28 |
| rcMltEgressCosProfileName Mlt Egress COS Profile Name, which is defined by
rcCosProfileTable | column | OctetString | .1.3.6.1.4.1.2272.1.17.10.1.29 |
| rcMltPortMembers The set of ports that are members of this MLT. | column | PortSet | .1.3.6.1.4.1.2272.1.17.10.1.3 |
| rcMltEgressPolicerAdminState Enable/disable Mlt Egress Policer | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.30 |
| rcMltAggrEgressBandwidth Aggregated Egress Bandwidth Policer is used. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.31 |
| rcMltAggrIngressBandwidth Aggregated Ingress Bandwidth Policer is used. | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.32 |
| rcMltAggrMacAlloc Aggregated Mac Allocation is used | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.33 |
| rcMltAggMinLink If number of active links goes below configured
minimum-link number, the entire LAG is declared
down. | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.34 |
| rcMltMtu MTU for ports in Mlt | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.35 |
| rcMltInterfaceType This value indicates whether ports in the mlt are of type
<normal/silent/uni>. A port can be included in any EVPN
service only if this attribute is set to uni. If the port
is not … | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.36 |
| rcMltConfiguredMembers The set of ports that are configured members of this MLT.
Toronto release allows us to add a port to a LACP enabled
MLT. These port get added as ConfiguredMembers | column | PortSet | .1.3.6.1.4.1.2272.1.17.10.1.37 |
| rcMltMtuAdminState Set Mlt MTU enable or disable | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.38 |
| rcMltPeerPortMembers deprecated The set of Peer ports which are connected to local ports
(rcMltPortMember) of this MLT.
This object has been deprecated/obsolete by object rcMltPeerPortMembersList | column | PortSet | .1.3.6.1.4.1.2272.1.17.10.1.39 |
| rcMltPortType The type of MLT port: access(1) or trunk(2). | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.4 |
| rcMltCpLimitPktRate Used to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second. | column | Integer32 | .1.3.6.1.4.1.2272.1.17.10.1.40 |
| rcMltCpLimitShutDownEnable Used to indicate if the mlt-ports should be
shutdown when the CpLimitPktRate is exceeded. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.17.10.1.41 |
| rcMltVlanIdList This bitfield is used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vlan Id 1. | column | OctetString | .1.3.6.1.4.1.2272.1.17.10.1.42 |
| rcMltEntryOwner Defines the owner of the MLT. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.43 |
| rcMltDatapathProgrammingState Defines the datapath programming state of
the MLT. | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.44 |
| rcMltL4Hash If enabled all the non fragmented L4 packets will
take L4 hashing and all the fragmented L4 packets
and L3 packets will take L3 hashing. If disabled
then both L3 and L4 packets wi… | column | EnableValue | .1.3.6.1.4.1.2272.1.17.10.1.45 |
| rcMltPrivateVlanType The mode used when private VLAN is associated with MLT.
If the VLAN is not private then this is ignored.
If the VLAN is private then the value must be
either trunk, isolated, or p… | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.46 |
| rcMltBpduMode This object specifies the BPDU send/receive mode:
send/receive BPDUs on all trunk ports (1) or
on a single trunk port (2). | column | Enumeration | .1.3.6.1.4.1.2272.1.17.10.1.47 |
| rcMltPeerPortMembersList A list of peer ports in the display format slot/port,slot/port/sub-port.
A port display format cannot be always hardcoded as slot/port. It depends
on the dynamic setting of the po… | column | OctetString | .1.3.6.1.4.1.2272.1.17.10.1.48 |
| rcMltFlexUniEnable Used to set FLEX UNI enable/disable on mlt | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.17.10.1.49 |
| rcMltNumVlanIds Used to indicate the number of VLAN IDs that
are stored in the rcMltVlanIds variable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.17.10.1.5 |
| rcMltVlanIds An array used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a
two octet value. The first octet in the pair holds
bits 15-8 of the VLAN ID, whil… | column | OctetString | .1.3.6.1.4.1.2272.1.17.10.1.6 |
| rcMltRowStatus Used to create/delete entries in the rcMltTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.17.10.1.7 |
| rcMltEnable Enable the entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.17.10.1.8 |
| rcMltLoadBalance Perform load balance? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.17.10.1.9 |