rcIsisGlobalIpv6SourceAddressType
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.63.1.16
Object
The type of address for existing router interface for management (ping/traceroute)
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.63.1.16- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcIsisGlobalGroup
- Siblings
- 21
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIsisGlobalAreaAuthType The authentication type for the area | scalar | Enumeration | .1.3.6.1.4.1.2272.1.63.1.1 |
| rcIsisGlobalHostName The hostname listed in LSP, or the system name if host
name is not configured. | scalar | OctetString | .1.3.6.1.4.1.2272.1.63.1.10 |
| rcIsisGlobalSpfDelay ISIS SPF delay in miliseconds | scalar | milliseconds Integer32 | .1.3.6.1.4.1.2272.1.63.1.11 |
| rcIsisGlobalControlVlan ISIS control vlan ID | scalar | Integer32 | .1.3.6.1.4.1.2272.1.63.1.12 |
| rcIsisGlobalIpSourceAddress ISIS PLSB IP address. Define an existing router interface
for management (ping/traceroute) | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.63.1.13 |
| rcIsisGlobalIpSourceAddressType The type of address for existing router interface
for management (ping/traceroute) | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.63.1.14 |
| rcIsisGlobalIpv6SourceAddress ISIS PLSB IPv6 address. Define an existing router interface
for management (ping/traceroute) | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.63.1.15 |
| rcIsisGlobalIpTunnelSourceAddress ISIS IP tunnel source address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.63.1.17 |
| rcIsisGlobalIpTunnelPort Port associated with the IP tunnel | scalar | InterfaceIndexOrZero | .1.3.6.1.4.1.2272.1.63.1.18 |
| rcIsisGlobalIpTunnelVrf VRF name associated with the IP tunnel | scalar | OctetString | .1.3.6.1.4.1.2272.1.63.1.19 |
| rcIsisGlobalAreaKeyId Authentication key-id for the area. This is
required if the auth-type is hmac-md5 else it is
not required. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.63.1.2 |
| rcIsisGlobalIpTunnelMtu The value specifies the logical tunnel MTU | scalar | Unsigned32 | .1.3.6.1.4.1.2272.1.63.1.20 |
| rcIsisGlobalMgmtIpAddr Inband management IPv4 address and can
be used by both DVR and non DVR enabled nodes. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.63.1.21 |
| rcIsisGlobalBackboneEnable Allow a non DVR BEB to join the DVR backbone tree
in order to receive redistributed DVR Host Routes
from all the different DVR Controllers in the SPB Network. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.63.1.22 |
| rcIsisGlobalAreaAuthKey Authentication key, this key will be used to
authenticate the LSP's received on the area | scalar | OctetString | .1.3.6.1.4.1.2272.1.63.1.3 |
| rcIsisGlobalDomainAuthType The authentication type for the domain | scalar | Enumeration | .1.3.6.1.4.1.2272.1.63.1.4 |
| rcIsisGlobalDomainKeyId The authentication key-id for the domain. This is
required if the auth-type is hmac-md5 else it is
not required. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.63.1.5 |
| rcIsisGlobalDomainAuthKey Authentication key, this key will be used to
authenticate the LSP's received on the domain | scalar | OctetString | .1.3.6.1.4.1.2272.1.63.1.6 |
| rcIsisGlobalCsnpInt Interval of time, in seconds, between periodic
transmission of a complete set of CSNPs on
multiaccess networks if this router is the
designated router at this level.
This object f… | scalar | Integer32 | .1.3.6.1.4.1.2272.1.63.1.7 |
| rcIsisGlobalRxmtLspInt Minimum interval, in seconds, between
re-transmission of a LSP at this level. This
object follows the resettingTimer behavior.
For ResettingTimer description see the ISIS MIB | scalar | Integer32 | .1.3.6.1.4.1.2272.1.63.1.8 |
| rcIsisGlobalPSNPInterval Minimum interval in seconds between sending Partial
Sequence Number PDUs at this level. This object
follows the resettingTimer behavior.
For ResettingTimer description see the ISI… | scalar | seconds Integer32 | .1.3.6.1.4.1.2272.1.63.1.9 |