rcIpv6SlowPathToCpu
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.62.1.1.1.17
Object
Used to enable / disable slow-path-to-cpu
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.62.1.1.1.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcIpv6Scalars
- Siblings
- 23
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6IcmpErrorInterval The rate (in milliseconds) at which
ICMP error messages can be sent out.
A value of zero means not be send any. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.1.1 |
| rcIpv6RouteStaticClear Clear all IPv6 static routes. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.10 |
| rcIpv6RouteStaticGlobalAdminEnabled Used to globally enable/disable all IPv6 static routes. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.11 |
| rcIpv6IcmpAnycastEchoReply Used to enable/disable icmp echo reply msg
for anycast addresses. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.12 |
| rcIpv6IcmpMulticastEchoReply Used to enable/disable icmp echo reply msg
for multicast addresses. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.13 |
| rcIpv6Autoconfig Used to enable / disable IPv6 autoconfiguration
from router advertisements | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.14 |
| rcIpv6IcmpAddrUnreach Used to enable / disable address unreachable message | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.15 |
| rcIpv6IcmpPortUnreach Used to enable / disable port unreachable message | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.16 |
| rcIpv6ClearGlobalIcmpStats Setting this object will clear global IPv6 ICMP statistics | scalar | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.1.18 |
| rcIpv6EcmpEnable Used to globally enable/disable equal-cost
multi-path feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.19 |
| rcIpv6MulticastAdminStatus This indicates the global admin status for
multicast. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.2 |
| rcIpv6EcmpMaxPath Used to globally set the maximum number of
paths that can be equal cost. | scalar | Unsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.1.20 |
| rcIpv6RoutePrefTableSize table size of the rcIpv6RoutePrefTable | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.1.21 |
| rcIpv6AlternativeRouteEnable Used to globally enable/disable alternative-route. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.22 |
| rcIpv6SourceRouteEnable Used to globally enable/disable
ipv6 source routing feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.23 |
| rcIpv6IcmpMulticastRequestEnable Used to globally enable/disable
ipv6 icmp echo multicast request feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.24 |
| rcIpv6IcmpNetUnreach Used to set icmp net unreach feature enable/
disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.3 |
| rcIpv6IcmpRedirectMsg Used to set icmp redirect feature enable/
disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.4 |
| rcIpv6IcmpErrorQuota The number of icmp error messages that
can be sent during the icmp error interval.
A value of zero means not be send any. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.1.5 |
| rcIpv6GlobalAdminEnabled Indicates whether IPv6 has been administratively
enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.6 |
| rcIpv6GlobalOperEnabled Indicates whether IPv6 is currently enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.1.7 |
| rcIpv6PrefixListTableSize Size of Ipv6 Prefix List Table | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.1.8 |
| rcIpv6ClearDhcpCounters Setting this object will clear IPv6 DHCP counters. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.1.9 |