rcIpRoutePolicySetOrigin

RAPID-CITY · .1.3.6.1.4.1.2272.1.8.100.13.1.27
MIB view Table view

Object

column r/w Enumeration 
igp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol).

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.8.100.13.1.27
Type
column
Access
readwrite
Status
current
Parent
rcIpRoutePolicyEntry
Table
rcIpRoutePolicyTable
Siblings
45

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpRoutePolicyId
Index used to identify a group of policies in the route policy tableRoute map id
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.1
rcIpRoutePolicyMatchNetwork
can specify one or more prefix list name or id(s)
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.10
rcIpRoutePolicyMatchIpRouteSource
In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperat…
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.11
rcIpRoutePolicyMatchNextHop
In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name(s) or id(s) seperat…
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.12
rcIpRoutePolicyMatchInterface
Match received interface. Only for rip routes. Ignored in all other cases.
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.13
rcIpRoutePolicyMatchRouteType
For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs to local autonomous s…
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.14
rcIpRoutePolicyMatchMetric
Match mec field in the incoming advertisement.
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.15
rcIpRoutePolicyMatchTag
specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values..
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.16
rcIpRoutePolicySetRoutePreference
if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values..
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.17
rcIpRoutePolicySetAsPath
The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string..
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.18
rcIpRoutePolicySetAsPathMode
It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.19
rcIpRoutePolicySequenceNumber
second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET parameters and an action.
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.2
rcIpRoutePolicySetAutomaticTagcolumnEnableValue.1.3.6.1.4.1.2272.1.8.100.13.1.20
rcIpRoutePolicySetCommunityNumber
this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.21
rcIpRoutePolicySetCommunityMode
this value can be either append or none unchanged - keep the community attribute in the route path as it is. none - remove the community in the route path additive - a…
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.22
rcIpRoutePolicySetMetricTypeInternal
Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.23
rcIpRoutePolicySetMetric
Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal value defined for p…
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.24
rcIpRoutePolicySetMetricType
Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.25
rcIpRoutePolicySetNextHop
IpAddress of the next hop router. Ignored for DVMRP routes.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.13.1.26
rcIpRoutePolicySetLocalPref
this value will be used during route decision process in the BGP protocol. Applicable to BGP only.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.28
rcIpRoutePolicySetOriginEgpAs
indicates the Remote autonomous sys number. Applicable to BGP only.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.29
rcIpRoutePolicyName
Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence …
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.3
rcIpRoutePolicySetTag
Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol. Value 0 indicates not set
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.30
rcIpRoutePolicySetWeight
Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEntry or FilterListWei…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.31
rcIpRoutePolicySetInjectNetList
specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement. Ignored for DVMRP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.32
rcIpRoutePolicyRowStatus
row status
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.8.100.13.1.33
rcIpRoutePolicySetMask
Set Mask Ip Address
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.13.1.34
rcIpRoutePolicyNssaPbit
Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs associated with that …
columnEnableValue.1.3.6.1.4.1.2272.1.8.100.13.1.35
rcIpRoutePolicyMatchVrf
An array used to identify which source VRFs have leaked routes to the local VRF
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.36
rcIpRoutePolicyMatchExtCommunity
Filter incoming/outgoing updates based on communities
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.37
rcIpRoutePolicySetExtCommunity
Set Extended-community string.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.38
rcIpRoutePolicySetExtCommunityMode
This value can be either additive, unchanged or overwrite.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.39
rcIpRoutePolicyEnable
Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.100.13.1.4
rcIpRoutePolicyMatchLocalPref
Match Local Prefix value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.40
rcIpRoutePolicyMatchIpRouteDest
to match route destination, one can specify one or more prefix list name(s) or id(s) separated by comma.
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.41
rcIpRoutePolicyMatchExtendedPref
To associate extended ACL(access control list) with the route policy. User can associate one or multiple extended ACLs.
columnOctetString.1.3.6.1.4.1.2272.1.8.100.13.1.42
rcIpRoutePolicyIpv6SetNextHop
Address of the ipv6 next hop router. Ignored for DVMRP routes.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.8.100.13.1.43
rcIpRoutePolicyMatchMetricTypeIsis
Match metric type field in the incoming ISIS routes in accept policy.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.44
rcIpRoutePolicySetMetricTypeIsis
Set Metric type ISIS.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.45
rcIpRoutePolicySetMetricTypeBgp
Set Metric type BGP.
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.46
rcIpRoutePolicyMode
specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, deny indicates ignore…
columnEnumeration.1.3.6.1.4.1.2272.1.8.100.13.1.5
rcIpRoutePolicyMatchProtocol
Match protocol. Used for RIP and DVMRP announce policy only. Value is one of multiple (logical 'OR) of the following values: direct(1), static(2), rip(4), ospf(8), …
columnInteger32.1.3.6.1.4.1.2272.1.8.100.13.1.6
rcIpRoutePolicyMatchAsPath
Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.7
rcIpRoutePolicyMatchCommunity
Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.8.100.13.1.8
rcIpRoutePolicyMatchCommunityExact
If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched).
columnEnableValue.1.3.6.1.4.1.2272.1.8.100.13.1.9
Indexes
ObjectTypeSyntaxOID
rcIpExtACLPrefixSourceAddr
This is the source address of the prefix.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.25.1.1
rcIpExtACLPrefixSourceMask
This is the source mask of the prefix.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.25.1.2
rcIpExtACLPrefixDestinationAddr
This is the destination address of the prefix.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.25.1.3
rcIpExtACLPrefixDestinationMask
This is a destination mask of the prefix.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.100.25.1.4
rcIpExtACLPrefixName
This is the extended ACL list to which the prefixes belongs. An extended ACL list must have one prefix at least.
columnOctetString.1.3.6.1.4.1.2272.1.8.100.25.1.5