rcIpMplsIfRefreshReduction
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.8.102.20.1.8
Object
column
r/w
Enumeration
Indicates whether RSVP refresh reduction is enabled or not. If set to global, refresh reduction will take the global RSVP refresh reduction value.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.8.102.20.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpMplsIfEntry
- Table
- rcIpMplsIfTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpMplsIfIfIndex An unique value to identify a physical interface
or a logical interface (VLAN). | column | Integer32 | .1.3.6.1.4.1.2272.1.8.102.20.1.1 |
| rcIpMplsIfRefreshMultiplier Configures the RSVP refresh multiplier for the interface.
If set to zero, the refresh interval will default to
to global rsvp refresh multiplier. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.10 |
| rcIpMplsIfRsvpHelloInterval Configures the RSVP hello interval on the interface.
If 0 the interface will use the RSVP global value.
If greater than 0 this value will override the
RSVP global value. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.11 |
| rcIpMplsIfMessageBundling Indicates whether RSVP message bundling is enabled or not.
If set to global, message bundling will take the global
RSVP message bundling value. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.102.20.1.12 |
| rcIpMplsIfMtu Configures the mtu of the mpls interface.
The value cannot exceed that of the system mtu size. | column | Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.13 |
| rcIpMplsIfRowStatus Used to create/delete entries | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.102.20.1.14 |
| rcIpMplsIfAuthentication Used to enable/disable RSVP MD5 authentication. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.102.20.1.15 |
| rcIpMplsIfAuthenticationKey RSVP MD5 authentication key. | column | OctetString | .1.3.6.1.4.1.2272.1.8.102.20.1.16 |
| rcIpMplsIfAdminGroupList Bitmap of admin group ids. The LSB is the
lowest numbered admin group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.17 |
| rcIpMplsIfBandwidth Maximum reservable bandwidth in kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.18 |
| rcIpMplsIfLdpAdminState Indicates whether LDP is enabled on the interface. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.102.20.1.2 |
| rcIpMplsIfLdpSessionKeepAlive Configures the LDP Session keep alive on the interface.
The value 0 is used to indicate a global value.
If 0 the interface will use the LDP global value.
If greater than 0 this v… | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.3 |
| rcIpMplsIfLdpHelloHoldTime Configures the LDP hello hold time on the interface.
If 0 the interface will use the LDP global value.
If greater than 0 this value will override the
LDP global value. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.4 |
| rcIpMplsIfLdpTransportAddr Configures the transport address of the LDP lsp.
If not set then transport address will be the MPLS
router id. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.102.20.1.5 |
| rcIpMplsIfLdpImportPolicy Configures the LDP import policy behavior.
If set to host-only then only host will import policies.
If set to all then all interfaces will import policies. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.102.20.1.6 |
| rcIpMplsIfRsvpAdminState Indicates whether RSVP is enabled on the interface. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.102.20.1.7 |
| rcIpMplsIfRefreshInterval Configures the RSVP refresh interval on the interface.
If set to zero, the refresh interval will default to
the global rsvp refresh interval. | column | seconds Unsigned32 | .1.3.6.1.4.1.2272.1.8.102.20.1.9 |