rcIpFilterSrcPort
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.8.10.20.1.9
Object
column
r/w
Integer32
TCP/UDP source port to filter on.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.8.10.20.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpFilterEntry
- Table
- rcIpFilterTable
- Siblings
- 45
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpFilterType Used to indicate a particular type of filter.
A 'global' filter is a filter that is applied to
all packets irregardless of the packet's source
or destination IP a… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.1 |
| rcIpFilterSrcOption Type of matching to perform on the field
'rcIpFilterSrcPort'.
For 'source' and 'destination' filters, this
value can only be 'equal(1)'. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.10 |
| rcIpFilterDstPort TCP/UDP destination port to filter on. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.11 |
| rcIpFilterDstOption Type of matching to perform on the field
'rcIpFilterDstPort'.
For 'source' and 'destination' filters, this
value can only be 'equal(1)'. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.12 |
| rcIpFilterCopyToCpu obsolete Used to specify whether a packet matching
this filter should be copied to the CPU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.13 |
| rcIpFilterMirror Used to specify whether a packet matching
this filter should be mirrored to the port
specified by 'rcMirrorByPortMirrorPort'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.14 |
| rcIpFilterHighPriority obsolete Used to specify whether a packet matching
this filter should be forwarded with high
priority. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.15 |
| rcIpFilterTcpConnect Used to specify whether a TCP packet matching
this filter should be accepted. Pass only
those matching TCP packets with either the
ACK bit or RST bit set. Apply only if the IP … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.16 |
| rcIpFilterIeeeVlanPriority Used to specify the priority bits for explicit
IEEE VLAN tag for a packet matching this filter.
If this priority bit field is greater than the
priority field currently in the IEEE… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.17 |
| rcIpFilterUsePktLimit obsolete Used to specify whether the 'rcIpFilterPktLimit'
field in this entry should be used when applying
this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.18 |
| rcIpFilterPktLimit obsolete The maximum packet size limit to filter against. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.19 |
| rcIpFilterDstAddr Destination IP address to filter on. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.10.20.1.2 |
| rcIpFilterRowStatus Row status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.10.20.1.20 |
| rcIpFilterMode Used to specify the operation mode for this entry.
'useDefaultAction' means use the setting specified
in the 'rcIpFilterPortDefaultAction' variable.
'forward' mea… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.21 |
| rcIpFilterIpTosRule obsolete Used to specify the operation mode for this entry.
'none' means do not manupulate the Ip ToS byte.
'ipTosRule1' means manipulate the Ip ToS byte
according to Quid/Gid Rule 1 wh… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.22 |
| rcIpFilterStopOnMatch Used to stop further filtering if this filter
is applied. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.23 |
| rcIpFilterDiffServMatchIeee8021PEnable Used to specify whether the value stored in the
variable 'rcIpFilterDiffServMatchIeee8021P' should
be used in this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.24 |
| rcIpFilterDiffServMatchIeee8021P Used to specify the match value for the 802.1P
field. If the 802.1P field in the incoming packet
matches this value, then this filter will be
applied to the packet. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.25 |
| rcIpFilterDiffServMatchDscpEnable Used to specify whether the values stored in the
variable 'rcIpFilterDiffServMatchDscp' and
'rcIpFilterDiffServMatchDscpReserved' should
be used in this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.26 |
| rcIpFilterDiffServMatchDscp Used to specify the match value for the DSCP.
If the DSCP in the incoming packet matches this
value, then this filter will be applied to the
packet.
The DSCP repres… | column | OctetString | .1.3.6.1.4.1.2272.1.8.10.20.1.27 |
| rcIpFilterDiffServMatchDscpReserved Used to specify the match value of the low-order
2 bits of the TOS byte (in network order). | column | OctetString | .1.3.6.1.4.1.2272.1.8.10.20.1.28 |
| rcIpFilterDiffServModifyIeee8021PEnable Used to specify whether the value stored in the
variable 'rcIpFilterDiffServModifyIeee8021P' should
be used in this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.29 |
| rcIpFilterDstMask Destination IP subnet mask to filter on. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.10.20.1.3 |
| rcIpFilterDiffServModifyIeee8021P Used to specify the value the 802.1P field
should be modified to if this filter is applied.
The modification is applied at the egress point. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.30 |
| rcIpFilterDiffServModifyDscpEnable Used to specify whether the value stored in the
variable 'rcIpFilterDiffServModifyDscp' should
be used in this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.31 |
| rcIpFilterDiffServModifyDscp Used to specify what the value of the DSCP
should be modified to if this filter is applied.
The modification is applied at the egress point.
The DSCP represents the… | column | OctetString | .1.3.6.1.4.1.2272.1.8.10.20.1.32 |
| rcIpFilterDiffServModifyDscpReserved Used to specify the modify value of the low-order
2 bits of the TOS byte (in network order). | column | OctetString | .1.3.6.1.4.1.2272.1.8.10.20.1.33 |
| rcIpFilterDiffServTrafficProfileId Used to specify which traffic profile should
be applied to packets matching this filter.
Traffic profiles are specified in the
'rc2kQosTrafficProfileTable' table. A '0'
value me… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.34 |
| rcIpFilterMatchIcmpRequest Used to specify whether matching on ICMP
Request packets should be performed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.35 |
| rcIpFilterMatchIpFragment Used to specify whether matching on fragmented
IP packets should be performed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.36 |
| rcIpFilterStatisticEnable Used to turn on/off Counters for this filter. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.37 |
| rcIpFilterInOctets obsolete The number of In-Octets for this filter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.38 |
| rcIpFilterInPackets obsolete The number of In-Packets for this filter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.39 |
| rcIpFilterSrcAddr Source IP address to filter on. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.10.20.1.4 |
| rcIpFilterRateLimitDiscardPackets obsolete The number of packets discarded due to rate
limiting. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.40 |
| rcIpFilterNextHopForwardIpAddr Next hop forward Ip address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.10.20.1.41 |
| rcIpFilterNextHopUnreachableDropEnable If next hop is unreachalbe, enable/disable to drop the packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.10.20.1.42 |
| rcIpFilterProtocolTypeUsrDefined When rcIpFilterProtocolType is set to usrDefined(256)
in an IP Filter, this field represents the 8-bit user defined
protocol identifier. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.43 |
| rcIpFilterIngressOctets The number of In-Octets for this filter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.44 |
| rcIpFilterIngressPkts The number of In-Packets for this filter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.45 |
| rcIpFilterRateLimitDiscardPkts The number of packets discarded due to rate
limiting. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.8.10.20.1.46 |
| rcIpFilterSrcMask Source IP subnet mask to filter on. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.10.20.1.5 |
| rcIpFilterId This filter's unique identifier(id). This id
is automatically generated by the system when
a filter is created. This id is used in the
'rcIpFilterGlobalListTable' and
'rcIpFilt… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.10.20.1.6 |
| rcIpFilterName This filter's name. | column | OctetString | .1.3.6.1.4.1.2272.1.8.10.20.1.7 |
| rcIpFilterProtocolType Type of protocol to filter on. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.10.20.1.8 |