rcIpConfOspfMetric
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.8.1.2.1.3
Object
column
r/w
Integer32
The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfDefaultMetric) will be used as metric value, when the state of the interface is up.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.8.1.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpConfOspfEntry
- Table
- rcIpConfOspfTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpConfOspfIfIndex An unique value to identify a physical interface
or a logical interface (VLAN). | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.2.1.1 |
| rcIpConfOspfPollInterval OSPF NBMA Interface Poll Interval. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.2.1.10 |
| rcIpConfOspfIfMtuIgnore Mtu-ignore flag is for ignoring the mtu checking in
ospf bdb | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.2.1.11 |
| rcIpConfOspfBfdEnable Used to enable/disable BFD for OSPF. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.1.2.1.12 |
| rcIpConfOspfRtrPriority The priority of this interface. Used in multi-
access networks, this field is used in the
designated router election algorithm. The value 0
signifies that the router is not elig… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.2.1.2 |
| rcIpConfOspfAuthKey The Authentication Key. If the Area's
Authorization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
… | column | OctetString | .1.3.6.1.4.1.2272.1.8.1.2.1.4 |
| rcIpConfOspfRowStatus Row status for this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.1.2.1.5 |
| rcIpConfOspfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.2.1.6 |
| rcIpConfOspfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before it's
neighbors declare the router down. This should
be some multiple of the Hello interval. This
v… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.1.2.1.7 |
| rcIpConfOspfIfAreaId A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.1.2.1.8 |
| rcIpConfOspfAuthType The authentication type specified for an interface.
Additional authentication types may be assigned locally. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.1.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpFlowSrcIpAddress The source IP address of an IP packet. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.3.1.1 |
| rcIpFlowSrcIpPort The source port of an IP packet. A zero value
in this field is used as a wildcard value. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.3.1.2 |
| rcIpFlowDstIpAddress The destination IP address of an IP packet. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.3.1.3 |
| rcIpFlowDstIpPort The destination port of an IP packet. A zero
value in this field is used as a wildcard value. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.3.1.4 |
| rcIpFlowProtocol The protocol type of an IP packet. A zero value
in this field is used as a wildcard value. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.3.1.5 |