rcIpConfGlobalEcmpMaxPath
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.8.1.6.4
Object
scalar
r/w
Integer32
Used to globally configure maximum ECMP paths number.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.8.1.6.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcIpConfGlobal
- Siblings
- 26
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpConfGlobalRipHoldDownTime Used to set the system-wide RIP hold down time
in seconds. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.1.6.1 |
| rcIpConfGlobalEcmp1PathList Routes to networks specified in this prefix-list
can have upto 1 ECMP path, irrespective of
ecmp-max-path configuration | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.10 |
| rcIpConfGlobalEcmp2PathList Routes to networks specified in this prefix-list
can have upto 2 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.11 |
| rcIpConfGlobalEcmp3PathList Routes to networks specified in this prefix-list
can have upto 3 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.12 |
| rcIpConfGlobalEcmp4PathList Routes to networks specified in this prefix-list
can have upto 4 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.13 |
| rcIpConfGlobalEcmpPathListApply This is to apply any changes in ECMP path list
configuration or in the prefix-lists configured to
be used as path list | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.14 |
| rcIpConfGlobalIcmpRedirectMsg | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.15 |
| rcIpConfGlobalMulticastMacFloodingStatus | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.16 |
| rcIpConfGlobalArpThreshold Defines the maximum number of outstanding arp request
a switch can generate. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.1.6.17 |
| rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable Used to determine whether more specific non local routes
will go into the routing table. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.18 |
| rcIpConfGlobalUdpCheckSumEnable Enable/disable UDP checksum calculation | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.19 |
| rcIpConfGlobalIcmpNetUnreach Used to set the icmp net unreach feature
enable/disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.2 |
| rcIpConfGlobalSuperNetEnable Used to globally enable Supernetting/ CIDR
routing for IP | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.20 |
| rcIpConfGlobalEcmp5PathList Routes to networks specified in this prefix-list
can have upto 5 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.21 |
| rcIpConfGlobalEcmp6PathList Routes to networks specified in this prefix-list
can have upto 6 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.22 |
| rcIpConfGlobalEcmp7PathList Routes to networks specified in this prefix-list
can have upto 7 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.23 |
| rcIpConfGlobalEcmp8PathList Routes to networks specified in this prefix-list
can have upto 8 ECMP path, irrespective of
ecmp-max-path configuration. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.8.1.6.24 |
| rcIpConfGlobalGarpEnable Used to set the gratuitous-arp enable/disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.25 |
| rcIpConfGlobalArpMcastMacFlooding Enable/disable Ip Arp Multicast Mac Flooding feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.26 |
| rcIpConfGlobalSourceRouteEnable Used to globally enable/disable ip source routing feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.27 |
| rcIpConfGlobalIcmpEchoBroadcastRequestEnable Used to globally enable/disable ip icmp echo broadcast request feature. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.28 |
| rcIpConfGlobalEcmpEnable Used to set the ecmp enable/disable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.3 |
| rcIpConfGlobalAlternativeEnable Used to globally configure alternative enable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.5 |
| rcIpConfGlobalRouteDiscoveryEnable Enable/disable ICMP Route Discovery feature | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.1.6.6 |
| rcIpConfGlobalRipTimeOutInterval Rip TimeOut Interval in seconds | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.1.6.8 |
| rcIpConfGlobalRipDefImportMetric Rip def import metric | scalar | Integer32 | .1.3.6.1.4.1.2272.1.8.1.6.9 |