rcIpConfEntry

RAPID-CITY · .1.3.6.1.4.1.2272.1.8.1.1.1
MIB view Table view

Object

row 
Entry containing IP routing information.  An entry
is automatically created in this table when routing 
 is enabled for an interface -or- when an ip address 
is configured on an interface.

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.8.1.1.1
Type
row
Status
current
Parent
rcIpConfTable
Table
rcIpConfTable
Children
32

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
rcIpConfIfIndex
An unique value to identify a physical interface or a logical interface (VLAN).
columnInteger32.1.3.6.1.4.1.2272.1.8.1.1.1.1
rcIpConfTriggeredUpdateEnable
Used to indicate whether the RIP triggered update feature should be enabled on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.10
rcIpConfAutoAggrerateEnable
Used to indicate whether the auto aggregation feature should be enabled on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.11
rcIpConfGenerateDefaultRoute
Used to indicate whether to generate a default RIP route on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.12
rcIpConfAdvertiseWhenDown
The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable po…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.13
rcIpConfDirectBroadcastEnable
Used to indicate whether this interface should forward direct broadcast traffic
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.14
rcIpConfRipInPolicy
Used to indicate whether this interface should advertize a RIP default route.
columnOctetString.1.3.6.1.4.1.2272.1.8.1.1.1.15
rcIpConfRipOutPolicy
Used to indicate whether this interface should accept a RIP default route.
columnOctetString.1.3.6.1.4.1.2272.1.8.1.1.1.16
rcIpConfOspfIfType
OSPF Interface Type.
columnEnumeration.1.3.6.1.4.1.2272.1.8.1.1.1.17
rcIpConfRipCost
Used to indicate the rip cost for this interface.
columnInteger32.1.3.6.1.4.1.2272.1.8.1.1.1.18
rcIpConfRipHolddown
Used to indicate the rip holddown timer for this interface
columnInteger32.1.3.6.1.4.1.2272.1.8.1.1.1.19
rcIpConfAdvertDefRte
Used to indicate whether this interface should advertize a RIP default route.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.2
rcIpConfRipTimeout
Used to indicate the rip timeout interval for this interface
columnInteger32.1.3.6.1.4.1.2272.1.8.1.1.1.20
rcIpConfRsmltEnable
Used to enable Route Smlt feature.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.21
rcIpConfReversePathCheckEnable
Used to indicate whether this interface should perform Reverse Path Check
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.22
rcIpConfReversePathCheckMode
Reverse Path Checking mode.
columnEnumeration.1.3.6.1.4.1.2272.1.8.1.1.1.23
rcIpConfIsisEnable
Enable/disable ISIS protocol for this IP entry
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.24
rcIpConfBfdEnable
Enable or disable BFD on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.25
rcIpConfIpVpnLiteEnable
Enable or disable ipvpn-lite capability on the specified circuitless ip interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.26
rcIpConfSpbMulticastEnable
Enable or disable spb-multicast on this port
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.27
rcIpConfSpbMulticastQuerierAddr
querier-addr for spb-multicast
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.1.1.1.28
rcIpConfVrrpVersion
Set the VRRP version for IPv4 on the specified interface. It does not impact the use of IPv6 VRRPv3
columnEnumeration.1.3.6.1.4.1.2272.1.8.1.1.1.29
rcIpConfAcceptDefRte
Used to indicate whether this interface should accept a RIP default route.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.3
rcIpConfPimGatewayEnable
Enable or disable PIM Gateway on this port
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.30
rcIpConfVrrpChkSumComputation
Set the IPv4 VRRPv3 checksum computation method on the specified interface.
columnEnumeration.1.3.6.1.4.1.2272.1.8.1.1.1.31
rcIpConfIpsecEnable
Used to enable ipsec feature.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.32
rcIpConfRowStatus
Row status for this entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.8.1.1.1.4
rcIpConfRipEnable
Enable or disable RIP routing on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.5
rcIpConfOspfEnable
Enable or disable OSPF routing on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.6
rcIpConfIgmpEnable
Enable or disable IGMP on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.7
rcIpConfAddrAssigned
Indicate whether IpAddress has been assigned for this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.8
rcIpConfDhcpEnable
Enable or disable DHCP on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.1.1.9
Indexes
ObjectTypeSyntaxOID
rcIpConfOspfAreaAggregateAreaID
The Area the Address Aggregate is to be found within.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.1.10.1.1
rcIpConfOspfAreaAggregateLsdbType
The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.
columnEnumeration.1.3.6.1.4.1.2272.1.8.1.10.1.2
rcIpConfOspfAreaAggregateNet
The IP Address of the Net or Subnet indicated by the range.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.1.10.1.3
rcIpConfOspfAreaAggregateMask
The Subnet Mask that pertains to the Net or Subnet.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.1.10.1.4