rcIpConfDhcpMinSec
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.8.8.1.3
Object
column
r/w
Integer32
Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immediately without any delay.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.8.8.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpConfDhcpEntry
- Table
- rcIpConfDhcpTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 256-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpConfDhcpIfIndex Interface number. The number can represent either
a physical or logical(VLAN) interface. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.8.1.1 |
| rcIpConfDhcpCounterClearTime This object indicates the time at which the counter
values in this entry were last reset to 0. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2272.1.8.8.1.10 |
| rcIpConfDhcpCircuitId Used to indicate if DHCP packets should have
option82 circuitId info inserted before sent to
servers, for this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.8.1.11 |
| rcIpConfDhcpRemoteId Used to indicate if DHCP packets should have
option82 remoteId info inserted before sent to
servers, for this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.8.1.12 |
| rcIpConfDhcpTrusted Used to indicate if DHCP packets come through a
trusted dhcp circuit. This means that packets with
giaddr set to 0 having option82 in it, will be forwarded
if the circuit is trus… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.8.1.13 |
| rcIpConfDhcpAgentAddr The IP address configured as relay on this interface; it is either the IP of the
physical interface or the IP of the VRRP address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.8.1.14 |
| rcIpConfDhcpMaxHop Used to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server). | column | Integer32 | .1.3.6.1.4.1.2272.1.8.8.1.2 |
| rcIpConfDhcpMode Used to indicate what type of DHCP packets this
interface should support. A value of none(1) will
result in all incoming DHCP and BOOTP packets to
be dropped. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.8.1.4 |
| rcIpConfDhcpRowStatus An entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.8.1.5 |
| rcIpConfDhcpNumRequests The total number of DHCP requests seen on this interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.8.8.1.6 |
| rcIpConfDhcpNumReplies The total number of DHCP replies seen on this interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.8.8.1.7 |
| rcIpConfDhcpAlwaysBroadcast Used to indicate if DHCP Reply packets should be
broadcast to the DHCP client on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.8.1.8 |
| rcIpConfDhcpClearCounters This object is used to clear the DHCP counters
in an entry. When set to clear(1), the values of
the counter objects in the entry will be reset to
0. When read, the value of this … | column | Enumeration | .1.3.6.1.4.1.2272.1.8.8.1.9 |