rcIpBgpPeerSooAddress

RAPID-CITY · .1.3.6.1.4.1.2272.1.8.101.9.1.29
MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress 
The site-of-origin ip address.

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.8.101.9.1.29
Type
column
Access
readwrite
Status
current
Parent
rcIpBgpPeerEntry
Table
rcIpBgpPeerTable
Siblings
35

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpBgpPeerEnable
Enable/Disable: controls whether the peer connection is enabled or disabled
columnEnumeration.1.3.6.1.4.1.2272.1.8.101.9.1.1
rcIpBgpPeerMaxPrefix
Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.10
rcIpBgpPeerNextHopSelf
Set NextHop Attribute to local router address before sending updates to remote peer
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.101.9.1.11
rcIpBgpPeerRoutePolicyIn
Route Policy Name that will be applied to all networks learned from this peer
columnOctetString.1.3.6.1.4.1.2272.1.8.101.9.1.12
rcIpBgpPeerRoutePolicyOut
Route policy name that will be applied to all outgoing updates
columnOctetString.1.3.6.1.4.1.2272.1.8.101.9.1.13
rcIpBgpPeerRouteReflectorClient
Indicates whether this peer is a route reflector client.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.101.9.1.14
rcIpBgpPeerSoftReconfigurationIn
If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. Enabling soft reconf…
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.15
rcIpBgpPeerSoftReconfiguration
If rcIpBgpPeerSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection by setting rcI…
columnEnumeration.1.3.6.1.4.1.2272.1.8.101.9.1.16
rcIpBgpPeerRemovePrivateAs
Enable and disable private AS number from being stripped when sending an update
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.17
rcIpBgpPeerRowStatus
Used to create/delete entries in the Table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.8.101.9.1.18
rcIpBgpPeerMD5Authentication
Enable and Disable MD5 authentication
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.19
rcIpBgpPeerIpAddress
The Ip address of this peer
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.101.9.1.2
rcIpBgpPeerDebugMask
value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), …
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.20
rcIpBgpPeerSendCommunitycolumnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.21
rcIpBgpPeerUpdateSourceInterface
The IP address to be used for Circuitless IP.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.8.101.9.1.22
rcIpBgpPeerBgpMplsCutThroughType
Specifies whether the BGP to MPLS cut through being used is an LSP or an LSP group.
columnEnumeration.1.3.6.1.4.1.2272.1.8.101.9.1.23
rcIpBgpPeerBgpMplsCutThroughId
The ID of LSP or LSP group being used for BGP to MPLS cut through.
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.24
rcIpBgpPeerState
The BGP peer connection state.
columnEnumeration.1.3.6.1.4.1.2272.1.8.101.9.1.25
rcIpBgpPeerLastError
The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING conta…
columnOctetString.1.3.6.1.4.1.2272.1.8.101.9.1.26
rcIpBgpPeerVpnv4Address
The vpnv4 routes specified.
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.27
rcIpBgpPeerIpvpnLiteCap
The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer.
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.28
rcIpBgpPeerRemoteAs
Remote Autonomous system number of this peer
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.3
rcIpBgpPeerSooAsNumber
The asnum for the site-of-origin for bgp peer.
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.30
rcIpBgpPeerSooAssignedNum
The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer.
columnUnsigned32.1.3.6.1.4.1.2272.1.8.101.9.1.31
rcIpBgpPeerSooType
The soo type can be asnum or ipaddress.
columnEnumeration.1.3.6.1.4.1.2272.1.8.101.9.1.32
rcIpBgpPeerRouteRefresh
Route refresh for bgp peer.
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.33
rcIpBgpPeerAsOverride
The AS Override value can be enabled or disabled for bgp peer.
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.34
rcIpBgpPeerAllowAsIn
The number of as-in allowed for bgp peer
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.35
rcIpBgpPeerBfdEnable
BFD Admin state flag.
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.36
rcIpBgpPeerGroupName
Peer group name to which this peer belongs (optional)
columnOctetString.1.3.6.1.4.1.2272.1.8.101.9.1.4
rcIpBgpPeerDefaultOriginate
To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.5
rcIpBgpPeerEbgpMultiHop
To accept and attempt BGP connections to external peers residing on networks that are not directly connected
columnEnableValue.1.3.6.1.4.1.2272.1.8.101.9.1.6
rcIpBgpPeerAdvertisementInterval
To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 5 to 120.
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.7
rcIpBgpPeerPassword
To enable MD5 authentication on a TCP connection between two BGP peers Case-sensitive password of up to 80 character
columnOctetString.1.3.6.1.4.1.2272.1.8.101.9.1.8
rcIpBgpPeerWeight
To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535.
columnInteger32.1.3.6.1.4.1.2272.1.8.101.9.1.9