rcIkeActiveSALocalIfIndex
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.86.4.1.2
Object
column
InterfaceIndex
This object specifies the interface index of the local address. Only port and vlan if-index are supported for this release.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.86.4.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- rcIkeActiveSAEntry
- Table
- rcIkeActiveSATable
- Siblings
- 16
Syntax
InterfaceIndex
- Source
- InterfaceIndex
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIkeActiveSAId This object specifies the unique ID of a SA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.86.4.1.1 |
| rcIkeActiveSAHashAlgorithm This object specifies the hash algorithm
negotiated for this IKE Phase 1 SA. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.10 |
| rcIkeActiveSAEncryptionAlgorithm This object specifies the encryption
algorithm negotiated for this IKE Phase 1 SA. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.11 |
| rcIkeActiveSAEncryptKeyLen This object specifies the encryption
key length negotiated for this IKE Phase 1 SA. | column | Integer32 | .1.3.6.1.4.1.2272.1.86.4.1.12 |
| rcIkeActiveSADHGroup This object specifies the Diffie-Hellman
group negotiated for this IKE Phase 1 SA. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.13 |
| rcIkeActiveSAExchangeMode This object specifies the IKE Phase 1 SA mode. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.14 |
| rcIkeActiveSALifetimeSeconds This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means
no expiration. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.86.4.1.15 |
| rcIkeActiveSAStatus This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means no
expiration. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.16 |
| rcIkeActiveSAInitiator This object specifies the whether the SA was
created by an Initiator or a Responder | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.17 |
| rcIkeActiveSALocalAddrType This object specifies the type of address
field in the rcIkeActiveSALocalAddr.
Only IPv6 address types are supported for
this release. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.86.4.1.3 |
| rcIkeActiveSALocalAddr This object specifies the string representation
of the local peer ID. The type of value
configured for this object is specified by the
rcIkeActiveSALocalAddrType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.86.4.1.4 |
| rcIkeActiveSARemoteAddrType This object specifies the type of address
field in the rcIkeActiveSARemoteAddr.
Only IPv6 address types are supported for
this release. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.86.4.1.5 |
| rcIkeActiveSARemoteAddr This object specifies the string representation
of the remote peer ID. The type of value
configured for this object is specified by the
rcIkeActiveSARemoteAddrType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.86.4.1.6 |
| rcIkeActiveSAName This object specifies the name for the SA. | column | OctetString | .1.3.6.1.4.1.2272.1.86.4.1.7 |
| rcIkeActiveSAAuthenticationMethod This object specifies the proposed
authentication method for the phase 1
security association.
Only the Pre-Shared Key authentication
method is supported in this release. | column | Enumeration | .1.3.6.1.4.1.2272.1.86.4.1.8 |
| rcIkeActiveSADPDTimeout This object specifies the Dead Peer
Detection timeout in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2272.1.86.4.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMACSecConnectivityAssociationId A unique Id assigned to each connectivity association
configured on the switch(VSP 4000/9000). This MIB element
is used for internal logic only. | column | Integer32 | .1.3.6.1.4.1.2272.1.88.1.1.1 |