rcEapPortFailOpenVlanId
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.57.2.1.16
Object
column
r/w
Integer32
This object specifies the ID of the Fail-Open VLAN for this port. Authenticated devices are moved into the configured Fail Open VLAN when the switch declares the RADIUS servers unreachable. A value of 0 indicates Fail Open VLAN functionality is not enabled for this port.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.57.2.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcEapPortEntry
- Table
- rcEapPortTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcEapPortIndex An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.57.2.1.1 |
| rcEapPortStatus This object allows enabling EAPoL on the port.
If status is auto(2), EAPoL is enabled and based on the 802.1x
authentication, traffic is allowed.
If status is forceAuthorized(3),… | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.10 |
| rcEapPortEapMaxClients This object specifies the maximum number of EAP-authentication
MAC addresses allowed on this port. A value of 0 indicates that
802.1X authentication is disabled on this port. | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.11 |
| rcEapPortMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on the port after one client
has been authenticated (known as MHSA). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.12 |
| rcEapPortGuestVlanEnable When this variable is set to TRUE, EAPoL Guest Vlan
feature will be enabled on the port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.2 |
| rcEapPortGuestVlanId A value representing the VLAN to be used as a Guest
VLAN. Access for unautheticated host/s connected to this port
is provided through this VLAN. A value of 0 indicates
that guest … | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.3 |
| rcEapPortMultiHostEnable When this variable is set to TRUE, the system is enabled to
have multiple 802.1X supplicants authenticated from the same
port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.4 |
| rcEapPortMultiHostMaxClients Integer value representing the maximum number of supplicants
that are allowed to get authenticated on the port. This is
applicable rcEapPortMultiHostEnable is set to TRUE. | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.5 |
| rcEapPortAllowNonEapHost When this variable is set to TRUE, the system is enabled to
allow hosts that do not participate in 802.1X authentication
to get network access. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.6 |
| rcEapPortNonEapMaxClients Integer value representing the maximum number of non-802.1X
hosts that are allowed to connect to the port. A value of 0
indicates that non-802.1X authentication is disabled
on thi… | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.7 |
| rcEapPortRadAuthNonEapClients When this variable is set to TRUE, the system is enabled to
allow Non-Eap hosts on the port to get network access through radius
based Mac authorization. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.8 |
| rcEapPortShutDownOnIntrusion When this variable is set to TRUE, the port is
shutdown on encountering [max + 1st] non-eap client
on the port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.9 |