rc2kBootConfigUnknownDstMacDiscardOperStatus

RAPID-CITY · .1.3.6.1.4.1.2272.1.100.5.1.34
MIB view Table view

Object

column obsolete Enumeration 
Indicates the device operational status of unknown 
destination mac discard.

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.100.5.1.34
Type
column
Access
readonly
Status
obsolete
Parent
rc2kBootConfigEntry
Table
rc2kBootConfigTable
Siblings
56

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rc2kBootConfigSlot
slot number, VSP uses 1,2
columnInteger32.1.3.6.1.4.1.2272.1.100.5.1.1
rc2kBootConfigTertiaryConfigSource
config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.10
rc2kBootConfigEnableAutoBoot
auto boot mode
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.11
rc2kBootConfigEnableFactoryDefaults
use factory default
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.12
rc2kBootConfigEnableDebugMode
debug mode
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.13
rc2kBootConfigEnableHwWatchDogTimer
hw watch dog timer
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.14
rc2kBootConfigEnableRebootOnError
reboot on error
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.15
rc2kBootConfigEnableTelnetServer
telnet server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.16
rc2kBootConfigEnableRloginServer
rlogin server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.17
rc2kBootConfigEnableFtpServer
ftp server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.18
rc2kBootConfigEnableTftpServer
tftp server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.19
rc2kBootConfigLastBootConfigSource
boot config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.2
rc2kBootConfigSwVersion
current sw version
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.100.5.1.20
rc2kBootConfigMulticastConfigProfile
multicast config
columnInteger32.1.3.6.1.4.1.2272.1.100.5.1.21
rc2kBootConfigEnableSshServer
ssh server
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.22
rc2kBootConfigEnableAltLed
Boot flag for enableing Alternate LED
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.23
rc2kBootConfigPrimaryBackupConfigSource
primary backup config source (safeconfig)
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.24
rc2kBootConfigSecondaryBackupConfigSource
secondary backup config source (safeconfig)
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.25
rc2kBootConfigTertiaryBackupConfigSource
tertiary backup config source (safeconfig)
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.26
rc2kBootConfigEnable8616ReAutoneg
Enable re-autoneg for 8616SX Cards (Intel GMAC fix)
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.27
rc2kBootConfigMezzImageSource
Mezz image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.28
rc2kBootConfigEnableMezz
Enable/disable Mezz Flag
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.29
rc2kBootConfigLastRuntimeImageSource
runtime image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.3
rc2kBootConfigPrimaryLicenseSource
primary license file name
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.30
rc2kBootConfigSecondaryLicenseSource
secondary license file name
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.31
rc2kBootConfigTertiaryLicenseSource
tertiary license file name
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.32
rc2kBootConfigUnknownDstMacDiscard obsolete
Enable/disable to discard the unknown destination mac address. A device reboot is required for the change to take effect.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.33
rc2kBootConfigEnableAutoAssignIp
Enable/disable auto-assign-ip feature
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.35
rc2kBootConfigUpgradeBootImageSource
Upgrade boot image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.36
rc2kBootConfigUpgradeRuntimeImageSource
Upgrade runtime image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.37
rc2kBootConfigUpgradeMezzImageSource
Upgrade mezz image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.38
rc2kBootConfigUpgradeConfigSource
Upgrade config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.39
rc2kBootConfigLastRuntimeConfigSource
runtime config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.4
rc2kBootConfigUpgradeRModImageSource
upgrade RMod image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.40
rc2kBootConfigUpgradeRCModImageSource
upgrade RCMod image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.41
rc2kBootConfigUpgradeESMImageSource
upgrade ESM image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.42
rc2kBootConfigFallBackBootImageSource
upgrade fall-back boot monitor source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.43
rc2kBootConfigEnableCfPcCompat
Enable/disable CF PC compatibility flag
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.44
rc2kBootConfigLinecardCompatibilityMode
This indicates the admin compatibility mode of the IO cards on the Chassis. In gen1 mode, both the generation 1 cards and generation 2 (ROF) cards will be supported and the …
columnEnumeration.1.3.6.1.4.1.2272.1.100.5.1.45
rc2kBootConfigEnableSpbmConfigMode
Enables spbm-config-mode
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.46
rc2kBootConfigEnableIpv6Mode
In VSP8200 IPv6 routes with prefix-length greater than 64 bits can be supported only when this flag is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.47
rc2kBootConfigEnableEnhancedsecureMode
Enable/disable Enhancedsecure Mode Flag
columnEnumeration.1.3.6.1.4.1.2272.1.100.5.1.48
rc2kBootConfigEnableUrpfMode
From VOSS5.x onwards, unicast reverse path feature will be supported on small system platforms only if this flag is enabled. Configuring the Urpf Mode will result in config save a…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.49
rc2kBootConfigPrimaryImageSource
image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.5
rc2kBootConfigEnableFlowControlMode
Enable/disable Flow Control Mode Flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.50
rc2kBootConfigAdvancedFeatureBwReservation
Allow to enable the port forwarding bandwidth working as loopback ports to support advanced feature mode, or disable the reservation for full port mode. Enable can be in levels of…
columnEnumeration.1.3.6.1.4.1.2272.1.100.5.1.51
rc2kBootConfigEnableVxlanGwFullInterworkingMode
Enables vxlan gateway full interworking mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.52
rc2kBootConfigNniMstp
Flag to decide whether configuration of mstp and other vlans on the NNI is allowed, default is not allowed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.53
rc2kBootConfigEnableDvrLeafMode
DVR can be configured as controller or leaf. IP related configuration and show commands are not allowed on leaf. dvr-leaf-mode flag has to be enabled first before user can config…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.54
rc2kBootConfigEnablevrfScaling
Flag to Enable or Disable vrf scaling.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.55
rc2kBootConfigLinerateDirectedBroadcast
Flag to Enable or Disable Linerate Directed Broadcast. With this flag set, IP directed broadcast will operate at linerate. Without this flag, all IP directed broadcast is handled …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.56
rc2kBootConfigEnableSyslogRfc5424Format
Flag to enable or disable the syslog output format. Enable will align syslog format with RFC 5424.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.100.5.1.59
rc2kBootConfigPrimaryConfigSource
config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.6
rc2kBootConfigSecondaryImageSource
image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.7
rc2kBootConfigSecondaryConfigSource
config source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.8
rc2kBootConfigTertiaryImageSource
image source
columnOctetString.1.3.6.1.4.1.2272.1.100.5.1.9