rc2kAtmPvcServiceType
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.100.9.3.1.7
Object
column
r/w
Enumeration
service type
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.100.9.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rc2kAtmPvcEntry
- Table
- rc2kAtmPvcTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | up |
1 | down |
2 | testing |
3 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rc2kAtmPvcIfIndex port number | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.100.9.3.1.1 |
| rc2kAtmPvcMaxBurstSize max burst size | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.10 |
| rc2kAtmPvcRowStatus row status | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.100.9.3.1.11 |
| rc2kAtmPvcOamLbMgmtEnable Indicate whether end-to-end F5 OAM loopback is enabled.
When it is enabled, OAM loopback request is sent
periodically | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.9.3.1.12 |
| rc2kAtmPvcOamLbSendFrequency Number of seconds between transmitting OAM loopback
request | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.13 |
| rc2kAtmPvcOamLbRetryFrequency Number of seconds between retry | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.14 |
| rc2kAtmPvcOamLbUpCount Number of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a
PVC connection state to up | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.15 |
| rc2kAtmPvcOamLbDownCount Number of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a
PVC state to down. | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.16 |
| rc2kAtmPvcOamTrapEnable Indicate whether OAM trap is enabled. When it is enabled,
a trap is sent to the management station when
rc2kAtmPvcOamVcStatus is going up or down. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.9.3.1.17 |
| rc2kAtmPvcOamVcStatus Indicate the status of PVC link.
Not Managed--VC is not being managed by OAM.
Down Verify --An OAM loopback failed. End-to-end F5 OAM
loopback cells are sent at retry frequency… | column | Enumeration | .1.3.6.1.4.1.2272.1.100.9.3.1.18 |
| rc2kAtmPvcOamLbRequestSent Number of OAM loopback request sent | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.100.9.3.1.19 |
| rc2kAtmPvcVpi vpi of this pvc | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.2 |
| rc2kAtmPvcOamLbReplySent Number of OAM loopback reply sent | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.100.9.3.1.20 |
| rc2kAtmPvcOamLbReplyReceived Number of OAM loopback reply received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.100.9.3.1.21 |
| rc2kAtmPvcVci vci of this pvc | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.3 |
| rc2kAtmPvcPvcId internal pvc id | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.100.9.3.1.4 |
| rc2kAtmPvcName name of pvc | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.100.9.3.1.5 |
| rc2kAtmPvcEncapsulation encapsulation | column | Enumeration | .1.3.6.1.4.1.2272.1.100.9.3.1.6 |
| rc2kAtmPvcPeakCellRate Peak cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is… | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.8 |
| rc2kAtmPvcSustainedCellRate Sustained cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, … | column | Integer32 | .1.3.6.1.4.1.2272.1.100.9.3.1.9 |