rcDot1agCfmMepDirection

RAISECOM-DOT1AG-MIB · .1.3.6.1.4.1.8886.6.1.32.1.7.1.1.3
MIB view Table view

Object

column r/w IEEE8021-CFM-MIBDot1agCfmMpDirection 
The direction in which the MEP faces on the Bridge port.

Context

MIB
RAISECOM-DOT1AG-MIB
OID
.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.3
Type
column
Access
readwrite
Status
current
Parent
rcDot1agCfmMepEntry
Table
rcDot1agCfmMepTable
Siblings
44

Syntax

IEEE8021-CFM-MIBDot1agCfmMpDirection
Source
IEEE8021-CFM-MIBDot1agCfmMpDirection
Base type
Enumeration

Values & Constraints

Type Values
1down
2up

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcDot1agCfmMepIdentifier
Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance ass…
columnIEEE8021-CFM-MIBDot1agCfmMepId.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.1
rcDot1agCfmMepLowPrDef
An integer value specifying the lowest priority defect that is allowed to generate fault alarm.
columnIEEE8021-CFM-MIBDot1agCfmLowestAlarmPri.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.10
rcDot1agCfmMepFngAlarmTime
The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s).
columnInteger32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.11
rcDot1agCfmMepFngResetTime
The time that defects must be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s).
columnInteger32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.12
rcDot1agCfmMepHighestPrDefect
The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state.
columnIEEE8021-CFM-MIBDot1agCfmHighestDefectPri.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.13
rcDot1agCfmMepDefects
A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4)
columnIEEE8021-CFM-MIBDot1agCfmMepDefects.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.14
rcDot1agCfmMepErrorCcmLastFailure
The last-received CCM that triggered an DefErrorCCM fault.
columnOctetString.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.15
rcDot1agCfmMepXconCcmLastFailure
The last-received CCM that triggered a DefXconCCM fault.
columnOctetString.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.16
rcDot1agCfmMepCcmSequenceErrors
The total number of out-of-sequence CCMs received from all remote MEPs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.17
rcDot1agCfmMepCciSentCcms
Total number of Continuity Check messages transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.18
rcDot1agCfmMepNextLbmTransId
Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.19
rcDot1agCfmMepIfIndex
This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.2
rcDot1agCfmMepLbrIn
Total number of valid, in-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.20
rcDot1agCfmMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.21
rcDot1agCfmMepLbrBadMsdu
The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.22
rcDot1agCfmMepLtmNextSeqNumber
Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.23
rcDot1agCfmMepUnexpLtrIn
The total number of unexpected LTRs received (20.39.1).
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.24
rcDot1agCfmMepLbrOut
Total number of Loopback Replies transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.25
rcDot1agCfmMepTransmitLbmStatus
A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.26
rcDot1agCfmMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitLbmDestIsMepId is 'fa…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.27
rcDot1agCfmMepTransmitLbmDestMepId
The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the c…
columnIEEE8021-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.28
rcDot1agCfmMepTransmitLbmDestIsMepId
True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmis…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.29
rcDot1agCfmMepTransmitLbmMessages
The number of Loopback messages to be transmitted.
columnInteger32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.30
rcDot1agCfmMepTransmitLbmDataTlv
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
columnOctetString.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.31
rcDot1agCfmMepTransmitLbmVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority.
columnInteger32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.32
rcDot1agCfmMepTransmitLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.33
rcDot1agCfmMepTransmitLbmResultOK
Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.34
rcDot1agCfmMepTransmitLbmSeqNumber
The Loopback Transaction Identifier (rcDot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if rcDot1agCfmMepTransmitLbmResultOK is false.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.35
rcDot1agCfmMepTransmitLtmStatus
A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.36
rcDot1agCfmMepTransmitLtmFlags
The flags field for LTMs transmitted by the MEP.
columnBits.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.37
rcDot1agCfmMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column rcDot1agCfmMepTransmitLtmTargetIsMepId is '…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.38
rcDot1agCfmMepTransmitLtmTargetMepId
An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address w…
columnIEEE8021-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.39
rcDot1agCfmMepPrimaryVid
An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or t…
columnUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.4
rcDot1agCfmMepTransmitLtmTargetIsMepId
True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.40
rcDot1agCfmMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that hand…
columnUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.41
rcDot1agCfmMepTransmitLtmResult
Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.42
rcDot1agCfmMepTransmitLtmSeqNumber
The LTM Transaction Identifier (rcDot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if rcDot1agCfmMepTransmitLtmResult is false.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.43
rcDot1agCfmMepTransmitLtmEgressIdentifier
Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address uni…
columnOctetString.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.44
rcDot1agCfmMepRowStatus
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.45
rcDot1agCfmMepActive
Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and fa…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.5
rcDot1agCfmMepFngState
Current state of the MEP Fault Notification Generator State Machine.
columnIEEE8021-CFM-MIBDot1agCfmFngState.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.6
rcDot1agCfmMepCciEnabled
If set to true, the MEP will generate CCM messages.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.7
rcDot1agCfmMepCcmLtmPriority
The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The man…
columnUnsigned32.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.8
rcDot1agCfmMepMacAddress
MAC address of the MEP.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.8886.6.1.32.1.7.1.1.9