rbTrapSetFailureReason
RAINBOW-MIB ·
.1.3.6.1.4.1.12394.1.2.6.12
Object
scalar
Enumeration
This parameter contains the reason the Set parameter command was rejected by device
Context
- MIB
- RAINBOW-MIB
- OID
.1.3.6.1.4.1.12394.1.2.6.12- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rbAuthorizationAndTraps
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | generalError |
2 | updateCRCFailed |
3 | wrongDefaultsValue |
4 | setDefaultsFailed |
5 | logPreffixTooLong |
6 | setLogPreffixFailed |
7 | invalidCellRadius |
8 | setCellRadiusFailed |
9 | setBsIDFailed |
10 | setBsMaskFailed |
11 | setArqModeFailed |
12 | setBandTypeFailed |
13 | txFrequencyOutOfLimitedRange |
14 | invalidTxFrequency |
15 | txFrequencyOutOfRange |
16 | setTxFrequencyFailed |
17 | invalidTxPower |
18 | setTxPowerFailed |
19 | invalidUplinkBasicRate |
20 | setUplinkBasicRateFailed |
21 | invalidDownlinkBasicRate |
22 | setDownlinkBasicRateFailed |
23 | setSuRateWhileMrtEnabled |
24 | invalidDownLinkRate |
25 | invalidUplinkRate |
26 | invalidOptimalRSSI |
27 | setOptimalRSSIFailed |
28 | berTestDataSizeUnderMin |
29 | berTestDataSizeOverMax |
30 | berTestIsAlreadyRunning |
31 | invalidBerTestRate |
32 | invalidBerTestSLA |
33 | setBerTestSlaFailed |
34 | invalidBerTestMaxPacketSize |
35 | setBerTestMaxPacketSizeFailed |
36 | berTestCreateConnectionFailed |
37 | telnetDisconnectFailed |
38 | invalidEthernetMode |
39 | setEthernetModeFailed |
40 | installerPasswordTooLong |
41 | setInstallerPasswordFailed |
42 | invalidBand |
43 | invalidAgingTime |
44 | invalidLimitDevicesNum |
45 | invalidLimitMaxDevicesEnable |
46 | maxCellRadiusConflict |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbAuthorizedManagersTable This table defines the stations that are authorized to manage the device.
Up to 10 Authorized Managers can be defined. | table | - | .1.3.6.1.4.1.12394.1.2.6.1 |
| rbTrapLedStatus This parameter defines status of the leds of corresponding device.
Not supported in current version. | scalar | OctetString | .1.3.6.1.4.1.12394.1.2.6.10 |
| rbTrapIpAddress This parameter is used as a trap variable binding in case that IP Address
should be transmitted. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.12394.1.2.6.11 |
| rbTrapRestoreDefaults This parameter is used to restore the default values of the configuration parameters
for each trap supported by device:
restoreTrapEnable (1) - means that the Trap Admin Status wi… | scalar | Enumeration | .1.3.6.1.4.1.12394.1.2.6.13 |
| rbTrapConfigTable This table defines configuration parameters for each trap supported by device. | table | - | .1.3.6.1.4.1.12394.1.2.6.2 |
| rbTrapThresholdsTable This table defines thresholds for specific counters. Trap is transmitted
if counter passes the threshold. Not supported in current version. | table | - | .1.3.6.1.4.1.12394.1.2.6.20 |
| rbTrapEventLogTable This table containes trap information for the last 1000 traps. | table | - | .1.3.6.1.4.1.12394.1.2.6.21 |
| rbTrapAlarmLogTable This table containes trap information for all alarms.
For traps that are not active the trapAlarmLogAddVarAttributes is NA. | table | - | .1.3.6.1.4.1.12394.1.2.6.22 |
| rbTrapGetActive This parameter is used to obtain active alarms from device.
When set to enable, the device respond by transmitting all currently active alarms. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.2.6.3 |
| rbTrapSeqNumber This parameter is used as trap variable binding and contains the sequential trap number.
Get of this variable should return the number of the last trap transmitted by the device.
… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12394.1.2.6.4 |
| rbTrapSeverity This parameter is used as trap variable binding and contains the severity
of the trap. | scalar | TrapSeverity | .1.3.6.1.4.1.12394.1.2.6.5 |
| rbTrapSource This parameter is used as trap variable binding and contains the trap source
entity : <NPU.Slot#>,
<AU.Slot#>,
<SU.MacAddress>,
<BS>,
<PSU#>,
… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12394.1.2.6.6 |
| rbTrapAdditionalInfo This parameter is used as trap variable binding and contains the
additional info, transmitted with the trap. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.2.6.7 |
| rbTrapCategory The trap category according to the X.733. | scalar | Enumeration | .1.3.6.1.4.1.12394.1.2.6.8 |
| rbTrapMinSeverity This parameter defines the minimum severity of traps to be transmitted by device.
Not supported in current version. | scalar | TrapSeverity | .1.3.6.1.4.1.12394.1.2.6.9 |