rbSuConfiguredScanMask

RAINBOW-MIB · .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.8
MIB view Table view

Object

column r/w OctetString 
This is a bit-mask field: 00-FF.
Allow scanning none standard frequencies that cannot be found by original Scan Steps - configured value.
Bit 0: Steps of 0 MHz (Start Frequency only).
Bit 1: Steps of 0.125 MHz.
Bit 2: Steps of 0.250 MHz.
Bit 3: Steps of 0.375 MHz.
Bit 4: Steps of 0.500 MHz.
Bit 5: Steps of 0.625 MHz.
Bit 6: Steps of 0.750 MHz.
Bit 7: Steps of 0.875 MHz for bandwidth multiple of 1.75. 
Bit 7: Steps of 1.250 MHz for bandwidth multiple of 2.5.

Context

MIB
RAINBOW-MIB
OID
.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.8
Type
column
Access
readwrite
Status
current
Parent
rbSuRadioParametersEntry
Table
rbSuRadioParametersTable
Siblings
19

Syntax

OctetString

Values & Constraints

Object Constraints
range: 1-1

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rbSuCurrentScanStartFreq
First frequency to be used by the scanning process - current value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.1
rbSuDiscreteF2
Su Discrete 2nd Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.10
rbSuDiscreteF3
Su Discrete 3rd Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.11
rbSuDiscreteF4
Su Discrete 4th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.12
rbSuDiscreteF5
Su Discrete 5th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.13
rbSuDiscreteF6
Su Discrete 6th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.14
rbSuDiscreteF7
Su Discrete 7th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.15
rbSuDiscreteF8
Su Discrete 8th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.16
rbSuDiscreteF9
Su Discrete 9th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.17
rbSuDiscreteF10
Su Discrete 10th Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.18
rbSuCurrentBandwidth
b175 (1): 1.75 MHz b35 (2): 3.5 MHz b50 (3): 5 MHz b70 (4): 7 MHz b100 (5): 10 MHz The actually available bandwidths depend on the SU's hardware and SW version. A band…
columnEnumeration.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.19
rbSuConfiguredScanStartFreq
First frequency to be used by the scanning process - configured value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.2
rbSuConfiguredBandwidth
This parameter defines the configured bandwidth, that will be in effect after the next reset.
columnEnumeration.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.20
rbSuCurrentScanEndFreq
End frequency to be used by the scanning process - current value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.3
rbSuConfiguredScanEndFreq
End frequency to be used by the scanning process - configured value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.4
rbSuCurrentScanStep
The scanning step in MHz- current value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.5
rbSuConfiguredScanStep
The scanning step in MHz- configured value. Resolution: 125 KHz step up to 1.75MHz for bandwith multiple of 1.75 and up to 5MHz for bandwith multiple of 2.5. Default for bandwith …
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.6
rbSuCurrentScanMask
This is a bit-mask field: 00-FF. Allow scanning none standard frequencies that cannot be found by original Scan Steps - current value.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.7
rbSuDiscreteF1
Su Discrete 1st Frequency. 0(Null) means frequency is not configured.
columnOctetString.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.9