rbSuConfiguredBandwidth
RAINBOW-MIB ·
.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.20
Object
column
r/w
Enumeration
This parameter defines the configured bandwidth, that will be in effect after the next reset.
Context
- MIB
- RAINBOW-MIB
- OID
.1.3.6.1.4.1.12394.1.2.7.2.11.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rbSuRadioParametersEntry
- Table
- rbSuRadioParametersTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | b175 |
2 | b35 |
3 | b50 |
4 | b70 |
5 | b100 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbSuCurrentScanStartFreq First frequency to be used by the scanning process - current value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.1 |
| rbSuDiscreteF2 Su Discrete 2nd Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.10 |
| rbSuDiscreteF3 Su Discrete 3rd Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.11 |
| rbSuDiscreteF4 Su Discrete 4th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.12 |
| rbSuDiscreteF5 Su Discrete 5th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.13 |
| rbSuDiscreteF6 Su Discrete 6th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.14 |
| rbSuDiscreteF7 Su Discrete 7th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.15 |
| rbSuDiscreteF8 Su Discrete 8th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.16 |
| rbSuDiscreteF9 Su Discrete 9th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.17 |
| rbSuDiscreteF10 Su Discrete 10th Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.18 |
| rbSuCurrentBandwidth b175 (1): 1.75 MHz
b35 (2): 3.5 MHz
b50 (3): 5 MHz
b70 (4): 7 MHz
b100 (5): 10 MHz
The actually available bandwidths depend on the SU's hardware and SW version.
A band… | column | Enumeration | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.19 |
| rbSuConfiguredScanStartFreq First frequency to be used by the scanning process - configured value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.2 |
| rbSuCurrentScanEndFreq End frequency to be used by the scanning process - current value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.3 |
| rbSuConfiguredScanEndFreq End frequency to be used by the scanning process - configured value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.4 |
| rbSuCurrentScanStep The scanning step in MHz- current value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.5 |
| rbSuConfiguredScanStep The scanning step in MHz- configured value.
Resolution: 125 KHz step up to 1.75MHz for bandwith multiple of 1.75 and
up to 5MHz for bandwith multiple of 2.5.
Default for bandwith … | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.6 |
| rbSuCurrentScanMask This is a bit-mask field: 00-FF.
Allow scanning none standard frequencies that cannot be found by original Scan Steps - current value. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.7 |
| rbSuConfiguredScanMask This is a bit-mask field: 00-FF.
Allow scanning none standard frequencies that cannot be found by original Scan Steps - configured value.
Bit 0: Steps of 0 MHz (Start Frequency on… | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.8 |
| rbSuDiscreteF1 Su Discrete 1st Frequency. 0(Null) means frequency is not configured. | column | OctetString | .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.9 |