rbNpuUnitControl
RAINBOW-MIB ·
.1.3.6.1.4.1.12394.1.2.2.2.1.1.13
Object
column
r/w
Enumeration
If resetAndRunFromShadow (4) is selected, card should perform reset and boot from the shadow software image. If makeRunningVersionOperational (5) is selected and current running version is marked as shadow, it should be marked as operational after the reset. Get command will always return none (1). None (1) should not be used in Set commands.
Context
- MIB
- RAINBOW-MIB
- OID
.1.3.6.1.4.1.12394.1.2.2.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rbNpuConfigEntry
- Table
- rbNpuConfigTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | reset |
4 | resetAndRunFromShadow |
5 | makeRunningVersionOperational |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbNpuSerialNo Serial number assigned for the card during the production time. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.1 |
| rbNpuOperVersionValidity The validity of the Operational (Main) Software. Not supported in current version. | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.10 |
| rbNpuShadowVersionValidity The validity of the Shadow Software. Not supported in current version. | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.11 |
| rbNpuRedundancyStatus NPU redundancy status. This parameters is read only (always active) in current version. | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.12 |
| rbNpuSetDefaults This parameter defines the way 'Default Group' parameters are initialised
with default values:
1 - Default values should not be copied to the Flash Memory,
2 - Full Factory Defaul… | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.14 |
| rbNpuHwConfigDescription NPU Hardware configuration description. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.15 |
| rbNpuManagementInterface The index of the NPU interface that can be used for management.
This parameters is read only in current version, and it is always 2 (both ports can be used for management). | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.16 |
| rbNpuCreateConfigFile Not applicable for Version 2 and higher.
This variable is used to instruct the NPU to create file containing
the Base Station configuration. Variable contains the name of file.
In… | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.17 |
| rbNpuCreateBackupConfigFile This variable is used to instruct the NPU to create file containing
the Base Station configuration.
cfgFileFull (1) is used for creating full backup files, name of the
configurat… | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.18 |
| rbNpuCumulativePowerOnTime Cumulative Power On Time (minutes).
Agent will return 0 if Cumulative Power On Time is unknown. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12394.1.2.2.2.1.1.19 |
| rbNpuSysName The name of the card; like System Name in MIB-II. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.2 |
| rbNpuBootSwVersion Boot Software Version. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.20 |
| rbNpuTemperature NPU Messured Temperature. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12394.1.2.2.2.1.1.21 |
| rbNpuDrapTtlRetries NPU DRAP TTL Retries.
Sets the limit of TTL retries for gateways that support the DRAP protocol
before concluding that the gateway is no longer active and removing it from the dat… | column | Integer32 | .1.3.6.1.4.1.12394.1.2.2.2.1.1.22 |
| rbNpuRedundantCPLDVersion NPU Redundant CPLD Version. The Redundant CPLD is needed to enable GPS support. | column | Integer32 | .1.3.6.1.4.1.12394.1.2.2.2.1.1.23 |
| rbNpuFaultStatus The severity of the card fault. This is summarized information regarding the card
healthiness in the slot. | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.3 |
| rbNpuHwRevision Hardware revision of the card. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.4 |
| rbNpuOperSwFileName Operational (Main) Software File Name. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.5 |
| rbNpuOperSwVersion Operational (Main) Software Version. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.6 |
| rbNpuShadowSwFileName Shadow Software File Name. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.7 |
| rbNpuShadowSwVersion Shadow Software Version. | column | OctetString | .1.3.6.1.4.1.12394.1.2.2.2.1.1.8 |
| rbNpuRunningSoftware Current running software. | column | Enumeration | .1.3.6.1.4.1.12394.1.2.2.2.1.1.9 |