rbNpuManagementInterface

RAINBOW-MIB · .1.3.6.1.4.1.12394.1.2.2.2.1.1.16
MIB view Table view

Object

column r/w Enumeration 
The index of the NPU interface that can be used for management.
This parameters is read only in current version, and it is always 2 (both ports can be used for management).

Context

MIB
RAINBOW-MIB
OID
.1.3.6.1.4.1.12394.1.2.2.2.1.1.16
Type
column
Access
readwrite
Status
current
Parent
rbNpuConfigEntry
Table
rbNpuConfigTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1managementPort
2managementAndDataPort

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rbNpuSerialNo
Serial number assigned for the card during the production time.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.12394.1.2.2.2.1.1.1
rbNpuOperVersionValidity
The validity of the Operational (Main) Software. Not supported in current version.
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.10
rbNpuShadowVersionValidity
The validity of the Shadow Software. Not supported in current version.
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.11
rbNpuRedundancyStatus
NPU redundancy status. This parameters is read only (always active) in current version.
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.12
rbNpuUnitControl
If resetAndRunFromShadow (4) is selected, card should perform reset and boot from the shadow software image. If makeRunningVersionOperational (5) is selected and current running …
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.13
rbNpuSetDefaults
This parameter defines the way 'Default Group' parameters are initialised with default values: 1 - Default values should not be copied to the Flash Memory, 2 - Full Factory Defaul…
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.14
rbNpuHwConfigDescription
NPU Hardware configuration description.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.15
rbNpuCreateConfigFile
Not applicable for Version 2 and higher. This variable is used to instruct the NPU to create file containing the Base Station configuration. Variable contains the name of file. In…
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.17
rbNpuCreateBackupConfigFile
This variable is used to instruct the NPU to create file containing the Base Station configuration. cfgFileFull (1) is used for creating full backup files, name of the configurat…
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.18
rbNpuCumulativePowerOnTime
Cumulative Power On Time (minutes). Agent will return 0 if Cumulative Power On Time is unknown.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.12394.1.2.2.2.1.1.19
rbNpuSysName
The name of the card; like System Name in MIB-II.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.2
rbNpuBootSwVersion
Boot Software Version.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.20
rbNpuTemperature
NPU Messured Temperature.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.12394.1.2.2.2.1.1.21
rbNpuDrapTtlRetries
NPU DRAP TTL Retries. Sets the limit of TTL retries for gateways that support the DRAP protocol before concluding that the gateway is no longer active and removing it from the dat…
columnInteger32.1.3.6.1.4.1.12394.1.2.2.2.1.1.22
rbNpuRedundantCPLDVersion
NPU Redundant CPLD Version. The Redundant CPLD is needed to enable GPS support.
columnInteger32.1.3.6.1.4.1.12394.1.2.2.2.1.1.23
rbNpuFaultStatus
The severity of the card fault. This is summarized information regarding the card healthiness in the slot.
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.3
rbNpuHwRevision
Hardware revision of the card.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.12394.1.2.2.2.1.1.4
rbNpuOperSwFileName
Operational (Main) Software File Name.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.5
rbNpuOperSwVersion
Operational (Main) Software Version.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.6
rbNpuShadowSwFileName
Shadow Software File Name.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.7
rbNpuShadowSwVersion
Shadow Software Version.
columnOctetString.1.3.6.1.4.1.12394.1.2.2.2.1.1.8
rbNpuRunningSoftware
Current running software.
columnEnumeration.1.3.6.1.4.1.12394.1.2.2.2.1.1.9