rlIpv6DefaultUP
RADLAN-IPv6 ·
.1.3.6.1.4.1.89.129.17
Object
scalar
r/w
Integer32
The default value inserted into the User Priority field in the 802.1q VLAN tag of IPv4 frames sent by the CPU.
Context
- MIB
- RADLAN-IPv6
- OID
.1.3.6.1.4.1.89.129.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rlIPv6
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlipv6IcmpErrorRatelimitInterval The time interval between tokens being placed in the bucket,
each token represents a single ICMP error message.
The interval measured in milliseconds. | scalar | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.89.129.1 |
| rlIpNetToPhysicalTableClearTable This entity is used to clear all or specific-type entries from ipNetToPhysicalTable. | table | - | .1.3.6.1.4.1.89.129.10 |
| rlIpv6HostForwardingTable This entity's IPv6 host forwarding table. | table | - | .1.3.6.1.4.1.89.129.11 |
| rlipv6EnabledByDefaultRemovedIfindex the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration b… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.89.129.12 |
| rlManagementIpv6 The system management IPv6 address which is kept between system mode changes | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.89.129.13 |
| rlManagementIpv6Action The system management IPv6 action:
clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6 | scalar | Enumeration | .1.3.6.1.4.1.89.129.14 |
| rlIpv6TunnelToIPv6DbTable This entity's IPv6 Tunnel if/addr/prefix table. | table | - | .1.3.6.1.4.1.89.129.15 |
| rlIpv6DefaultTC The default value inserted into the TC
field of the IPv6 header of datagrams originated at
this entity, whenever a TC value is not supplied
by the application. | scalar | Integer32 | .1.3.6.1.4.1.89.129.16 |
| rlIpv6MtuSize Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.129.18 |
| rlipv6IcmpErrorRatelimitBucketSize The maximum number of tokens stored in the bucket,
each token represents a single ICMP error message. | scalar | Integer32 | .1.3.6.1.4.1.89.129.2 |
| rlipv6LLDefaultZone The interface which would be used as the egress interface
for packets sent without a specified IPv6Z interface identifier
or with the default '0' identifier. Zero value means no d… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.89.129.3 |
| rlIpv6GeneralPrefixTable This table defines general prefix description,
based on which a number of longer, more specific, prefixes can
be defined. | table | - | .1.3.6.1.4.1.89.129.4 |
| rlipv6MaximumHopsNumber Maximum number of hops used in router advertisements and all IPv6 packets that
are originated by the router. | scalar | Integer32 | .1.3.6.1.4.1.89.129.5 |
| rlIpv6RouterAdvertPrefixTable This table defines IPv6 prefixes which are included in IPv6 Neighbor
Discovery (ND) router advertisements. | table | - | .1.3.6.1.4.1.89.129.6 |
| rlIpv6RouterAdvertTable This table is parallel to inetCidrRouteTable, and is used to
configure or display additional route parameters. | table | - | .1.3.6.1.4.1.89.129.7 |
| rlipv6InetCidrTableClear This scalar indicates to clear all ipv6 routes from inetCidrTable. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.89.129.8 |
| rlIpv6PathMtuTable This table used to represent all Path MTU changes to specific destination
received from 'packet-too-big' messages. | table | - | .1.3.6.1.4.1.89.129.9 |