throughputReportTable
RAD-TEST-MIB ·
.1.3.6.1.4.1.164.6.1.15.3.2
Object
table
This table indicates the throughput Report.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = throughput (0)
The throughput test find out the maximum frame or bits
rate without lost frames the DUT can manage. The test
begins at 100% frame rate. If any frames are lost, the test
is repeated at a lower frame rate. This process continues
until the maximum throughput is determined.
Context
- MIB
- RAD-TEST-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.3.2- Type
- table
- Status
- current
- Parent
- radTestPerfRepResults
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tstNePerfRepGeneralResultsTable This table includes the general status of each trial.
An entry in this table will be created upon activating a test
and shall be removed upon deleting a test. | table | - | .1.3.6.1.4.1.164.6.1.15.3.1 |
| twampReportIntervalTable TWAMP report table to show intervals. | table | - | .1.3.6.1.4.1.164.6.1.15.3.10 |
| tstNeThroughputIterationTable This table contains an information about the number of
loss packets in each attempt of throughput rate repetition. | table | - | .1.3.6.1.4.1.164.6.1.15.3.12 |
| latencyReportTable This table indicates the throughput Report.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = latency (2)
The laten… | table | - | .1.3.6.1.4.1.164.6.1.15.3.3 |
| framelossRateReportTable This table indicates the Frame loss result.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = frameloss (1).
… | table | - | .1.3.6.1.4.1.164.6.1.15.3.4 |
| tstNePerfRepStatusTable This table includes the status of each iteration of test x.
An entry in this table will be created upon activating a test
and shall be removed upon deleting a test. | table | - | .1.3.6.1.4.1.164.6.1.15.3.5 |
| ituSatReportTable This table holds the measurements and results for each Y.1564 test
that was performed. | table | - | .1.3.6.1.4.1.164.6.1.15.3.6 |
| ituSatResponderPerfTable This table holds packet counters for Y.1564 test responders. | table | - | .1.3.6.1.4.1.164.6.1.15.3.7 |
| ituSatConfPbitTable This table holds the results of the configuration test per generator,
P-bit and direction.
Note:
ituSatReportResult and ituSatBurstReportResult hold results per
configu… | table | - | .1.3.6.1.4.1.164.6.1.15.3.8 |
| twampReportCurrentTable TWAMP report table to show current interval. | table | - | .1.3.6.1.4.1.164.6.1.15.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| throughputReportEntry An entry in table. | row | - | .1.3.6.1.4.1.164.6.1.15.3.2.1 |