ituSatReportPbitIndex
RAD-TEST-MIB ·
.1.3.6.1.4.1.164.6.1.15.3.6.1.1
Object
column
RadTestPbitIndex
The P-bit index of the report.
Allows holding measurements and result per P-bit.
One entry for each set P-bit in the ituSatGeneratorTestedPbits.
If the ituSatGeneratorTestedPbits is zero i.e. untagged EVC, then
there is a single entry with an index value of zero.
Context
- MIB
- RAD-TEST-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.3.6.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- ituSatReportEntry
- Table
- ituSatReportTable
- Siblings
- 21
Syntax
RadTestPbitIndex
- Source
- RadTestPbitIndex
- Base type
Enumeration
Values & Constraints
Type Values
0 | pbit0 |
1 | pbit1 |
2 | pbit2 |
3 | pbit3 |
4 | pbit4 |
5 | pbit5 |
6 | pbit6 |
7 | pbit7 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ituSatReportLostFrames The number of frames lost.
The FLR is calculated by:
(ituSatReportLostFrames / ituSatReportTxFrames)
The initial value is zero. | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.6.1.10 |
| ituSatReportFtdMin The minimum measured frame transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.11 |
| ituSatReportFtdAverage The average calculated frame transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.12 |
| ituSatReportFtdMax The maximum measured frame transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.13 |
| ituSatReportFtdStd The calculated standard deviation of the frame transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.14 |
| ituSatReportFdvAverage The average calculated frame delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.15 |
| ituSatReportFdvMax The maximum calculated frame delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.16 |
| ituSatReportUas The number of unavailable seconds.
This object is relevant only for the performance test. For the other
test type entries the value is zero.
The init… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.17 |
| ituSatReportAvailability The percentage of available time.
The availability is calculated by:
(ituSatGeneratorPerfDuration - ituSatReportUas) * 10000 / ituSatGeneratorPerfDuration
… | column | hundredth of percent Unsigned32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.18 |
| ituSatReportTotalTxRate The total transmission rate (i.e. green and yellow frames) that the
generator was configured to in the sub-test.
This object is relevant only for the color-aware EI… | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.19 |
| ituSatReportTestTypeIndex The sub-test type index of the report.
Allows holding measurements and result per sub-test type.
Entries are created according to the associated configuration in th… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.3.6.1.2 |
| ituSatReportTotalIrAverage The average calculated total information rate (i.e. green and yellow
frames).
This object is relevant only for the color-aware EIR and color-aware
traffic policing … | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.20 |
| ituSatReportTotalTxFrames The total number of transmitted frames (i.e. green and yellow frames).
This object is relevant only for the color-aware EIR and color-aware
traffic policing test ty… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.6.1.21 |
| ituSatReportTotalLostFrames The total number of frames lost (i.e. green and yellow frames).
The total FLR is calculated by:
(ituSatReportTotalLostFrames / ituSatReportTotalTxFrames)
… | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.6.1.22 |
| ituSatReportDirectionIndex The direction index of the report.
Allows holding measurements per direction.
For unidirectional test only the forward(1) entry is created.
For bidirectional test t… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.3.6.1.3 |
| ituSatReportResult The result of the sub-test.
The initial value is notApplicable(1).
Upon completion of the sub-test the value changes to passed(2) or
failed(3).
If the test is stopp… | column | RAD-TCRadTestResult | .1.3.6.1.4.1.164.6.1.15.3.6.1.4 |
| ituSatReportTxRate The transmission rate that the generator was configured to in the
sub-test. | column | Kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.5 |
| ituSatReportIrMin The minimum measured information rate.
The initial value is zero. | column | Kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.6 |
| ituSatReportIrAverage The average calculated information rate.
The initial value is zero. | column | Kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.7 |
| ituSatReportIrMax The maximum measured information rate.
The initial value is zero. | column | Kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.6.1.8 |
| ituSatReportTxFrames The number of transmitted frames.
The initial value is one. | column | frames SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.6.1.9 |