ituSatProfileCirSteps
RAD-TEST-MIB ·
.1.3.6.1.4.1.164.6.1.15.1.3.1.18
Object
column
r/w
OctetString
The transmission rate in each step of the CIR sub-test, configurable
as percentage of CIR.
The last transmission rate must be 100% CIR therefore only up to 3
additional rates are configurable.
Unused steps must have a corresponding value of 0%.
The default shall be 4 steps of 25%, 50%, 75% and 100% of CIR.
Examples:
1 step of 100% - '64000000'H
3 steps of 30% ,60%, 100% - '1E3C6400'H
This object is relevant only for generators.
Context
- MIB
- RAD-TEST-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.1.3.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ituSatProfileEntry
- Table
- ituSatProfileTable
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ituSatProfileIndex A unique number as profile identifier. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.1 |
| ituSatProfileBiFlrThreshold The service acceptance criteria for bidirectional Frame Loss Ratio.
This object is relevant only for generators. | column | ppm Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.10 |
| ituSatProfileBiFtdThreshold The service acceptance criteria for bidirectional Frame Transfer
Delay.
This object is relevant only for generators. | column | micro seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.11 |
| ituSatProfileBiFdvThreshold The service acceptance criteria for bidirectional Frame Delay
Variation.
This object is relevant only for generators. | column | micro seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.12 |
| ituSatProfileBiAvailThreshold The service acceptance criteria for bidirectional Availability.
This object is relevant only for generators. | column | hundredth of percent Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.13 |
| ituSatProfileScope The scope of the test: configuration test, performance test, or both
phases.
This object is relevant only for generators. | column | Bits | .1.3.6.1.4.1.164.6.1.15.1.3.1.14 |
| ituSatProfileDirection The direction in which the test is performed. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.1.3.1.15 |
| ituSatProfileColorMode The color mode that is used for the test. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.1.3.1.16 |
| ituSatProfileTrafficPolicing Allows to include or exclude the traffic policing sub-test from the
configuration phase. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.1.3.1.17 |
| ituSatProfileConfDuration The duration of the configuration test.
This duration is used for each tested P-bit.
This object is relevant only for generators. | column | seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.19 |
| ituSatProfileName A meaningful printable profile name. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.1.3.1.2 |
| ituSatProfilePerfDuration The duration of the performance test.
This object is relevant only for generators. | column | minutes Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.20 |
| ituSatProfileRateConvention Indicates whether rate measurements are be shown in the test report
as 'data-rate' (IR) or converted to 'line rate' (ULR).
This object is relevant only for generato… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.1.3.1.21 |
| ituSatProfileResponderType The type of the responder.
This object is relevant only for generators. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.1.3.1.22 |
| ituSatProfileRowStatus This object enables creation and deletion of profiles. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.1.3.1.3 |
| ituSatProfileEtherType The EtherType of the test frames. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.1.3.1.4 |
| ituSatProfileFrameSize The size of test frames.
This size refers to the total number of bytes in the frame including
the header and trailer of the frame but excluding the tag structure.
C… | column | bytes Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.5 |
| ituSatProfileUniFlrThreshold The service acceptance criteria for unidirectional Frame Loss Ratio.
This object is relevant only for generators. | column | ppm Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.6 |
| ituSatProfileUniFtdThreshold The service acceptance criteria for unidirectional Frame Transfer
Delay.
This object is relevant only for generators. | column | micro seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.7 |
| ituSatProfileUniFdvThreshold The service acceptance criteria for unidirectional Frame Delay
Variation.
This object is relevant only for generators. | column | micro seconds Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.8 |
| ituSatProfileUniAvailThreshold The service acceptance criteria for unidirectional Availability.
This object is relevant only for generators. | column | hundredth of percent Unsigned32 | .1.3.6.1.4.1.164.6.1.15.1.3.1.9 |