prtSonetStm1CnfgIdx

RAD-Sonet-MIB · .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1

MIB view Table view

Object

column Integer32

This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be performed
only to the Temporary Config (=255).

Context

MIB: RAD-Sonet-MIB
OID: .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1
Type: column
Access: readonly
Status: current
Parent: prtSonetStm1Entry
Table: prtSonetStm1Table
Siblings: 16

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtSonetStm1S1ProtocolClock This parameter allows user to select whether to enable use of Remote Side Clock according to the Protocol passed on S1 Bit.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.10`
prtSonetStm1GatewayRingSubnetAddress This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetMask	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.11`
prtSonetStm1GatewayRingSubnetMask This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetAddress	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.12`
prtSonetStm1MngProtDeviationType This parameter is used in conjunction with prtSonetStm1MngProt to define management protocol used & type of deviation (if exist) from standard. Standard = no deviation from stan…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.13`
prtSonetStm1MngSameIpAsHost This parameter indicates whether IP address used for management is same as the device IP address	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.14`
prtSonetStm1MngIpAddress This parameter defines IP address for DCC management for this link, together with prtSonetStm1MngIpSubnetMask. This parameter is applicable only if prtSonetStm1MngSameIpAsHost=…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.15`
prtSonetStm1MngIpSubnetMask This parameter defines IP subnet mask for DCC management for this link, together with prtSonetStm1MngIpAddress This parameter is applicable only if prtSonetStm1MngSameIp=no	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.16`
prtSonetStm1MngDefaultGateway This parameter defines default Gateway address for DCC management for this link. This parameter is applicable only if prtSonetStm1MngSameIp=no	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.17`
prtSonetStm1Idx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2`
prtSonetStm1ClockSrc Clock Source of the STM-1 port. lbt = Loop Back Timing.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3`
prtSonetStm1DccMode DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1.... d12 enable use…	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4`
prtSonetStm1RoutingProt Routing Protocol.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5`
prtSonetStm1MngProt Management Protocol over DCC: Proprietary, PPP, Frame Relay, HDLC or LAPD over HDLC . ppp = according to STD-51 ( rfc1661/1662)	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6`
prtSonetStm1OperationalMode Operational Mode. linear - cannot be selected when there is Redundancy between the STM-1 ports.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7`
prtSonetStm1VoiceChannel This parameter enable user to select whether voice channel will be transferred using E1 byte, E2 Byte, or not at all.	column	Enumeration	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8`
prtSonetStm1OutputRate This parameter indicates the output rate in cells/sec, which is supported per port.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.9`