prtPhMlMfSyncSlot

RAD-Mpmx-MIB · .1.3.6.1.4.1.164.3.2.3.2.2.5.1.12

MIB view Table view

Object

column r/w Enumeration

This attribute indicates whether the sync is synchronized
according to a certain card and the slot of this card.
This operation is required in order to bypass signaling of
PCM voice channels.
In the ?004 Unit the entries io6(10)..io12(16) are not valid

Context

MIB: RAD-Mpmx-MIB
OID: .1.3.6.1.4.1.164.3.2.3.2.2.5.1.12
Type: column
Access: readwrite
Status: current
Parent: prtPhMlCnfgEntry
Table: prtPhMlCnfgTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`2`	none
`5`	io1
`6`	io2
`7`	io3
`8`	io4
`9`	io5
`10`	io6
`11`	io7
`12`	io8
`13`	io9
`14`	io10
`15`	io11
`16`	io12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prtPhMlCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.1`
prtPhMlSyncRestore Sync Restoration time, in seconds. notApplicable=0.	column	Integer32	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.10`
prtPhMlBus The TDM BUS this port is linked to.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.11`
prtPhMlClockSource The Clock Source: TC (Tx Clock) or RC (Rx Clock) signals.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.13`
prtPhMlErrCorrection This object indicates if Error Correction mechanism should be applied or not. It will be applicable only if the interface HW includes the Error Correction chip.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.14`
prtPhMlCorrectionMode This object is applicable only when prtPhMlErrCorrection=yes. random - enables to correct up to 3 random errors in an 23 bit frame built from 12 data bits and 11 appended…	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.15`
prtPhMlControlSignals This object shows whether the Port will ignore or implement the control signals like DCD, CTS, DTR.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.16`
prtPhMlInterfaceType The SW Configurable Interface Type.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.17`
prtPhMlClockPolarity This object indicates the clock polarity.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.18`
prtPhMlSltIdx This attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For the Vmux2100 Main …	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.2`
prtPhMlPrtIdx This attribute indicates a unique port number. ML-20 cards have just one external interface.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.3`
prtPhMlConnect This attribute indicates whether the port should be considered in any of the mux algorithms.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.4`
prtPhMlRate This attribute indicates the configured port speed. auto - rate is adapted automatically to the attached modem rate.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.5`
prtPhMlCAS This attribute indicates whether Channel Associated Signaling (CAS) is used.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.6`
prtPhMlClockMode Clock mode.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.7`
prtPhMlSatBuffer Satellite Buffer (+/- 256).	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.8`
prtPhMlDialProcess Dial Process.	column	Enumeration	`.1.3.6.1.4.1.164.3.2.3.2.2.5.1.9`