prtExHs4MfClkSrcSlt
RAD-Mpmx-MIB ·
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.12
Object
column
r/w
Enumeration
This attribute indicates whether the port Tx is multiframe synchronized with Rx multiframe of another port and the slot position of that port. This opration is required in order to bypass signaling of PCM voice channels. When its value is Local(2) there is no meaning to 'prtExHs4MfClkSrcPrt' parameter. In the ?004 Unit the entries io6(10)..io16) are not valid
Context
- MIB
- RAD-Mpmx-MIB
- OID
.1.3.6.1.4.1.164.3.2.3.2.7.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtExHs4CnfgEntry
- Table
- prtExHs4CnfgTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | local |
5 | io1 |
6 | io2 |
7 | io3 |
8 | io4 |
9 | io5 |
10 | io6 |
11 | io7 |
12 | io8 |
13 | io9 |
14 | io10 |
15 | io11 |
16 | io12 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtExHs4CnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg | column | Integer32 | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.1 |
| prtExHs4OosCode OOS Code | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.10 |
| prtExHs4IdleCode Type value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H,
42H,49H,84H,92H | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.11 |
| prtExHs4MfClkSrcPrt A unique number to identify a port position in the mux if the
MultiFrame clock source is valid (YES).
inPrt1 - for MTML-H/E1 cards. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.13 |
| prtExHs4SltIdx This attribute indicates a unique slot position where
the card is inserted. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.2 |
| prtExHs4PrtIdx A unique identifier of the port, within the card. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.3 |
| prtExHs4Connect This attribute indicates whether the port should be
considered in any of the mux algorithm. It also affects
all the module considerations because the card has only
one external (… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.4 |
| prtExHs4LineType This attribute is the line type parameter for T1/E1
interface.
The user should select only the parameters relevant to the
specific card:
T1 line code parameters for the HS-4/1 and… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.5 |
| prtExHs4LineCode This attribute is the line code parameter used for T1/E1
interface.
The user should select only the parameters relevant to the
specific card:
T1 line code parameters for the MPH.1… | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.6 |
| prtExHs4LineLen This attribute is the line length parameter used only for
T1 interfaces.
len399p533ft=len-399-533ft | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.7 |
| prtExHs4RestoreT Time passing from the disappearance of the loss of
synchronization condition (red alarm), to the restoration
of normal service. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.8 |
| prtExHs4OosSig Out of Service signal type. | column | Enumeration | .1.3.6.1.4.1.164.3.2.3.2.7.1.1.9 |