agnSigProfileABCD

RAD-Mpmx-MIB · .1.3.6.1.4.1.164.3.1.2.10.1.1.4
MIB view Table view

Object

column r/w OctetString 
For MP-2100/MP-2200 and for MP-104/204 from R2:
This object represents 6 parameters, by 3 Octets :
Busy  Code-MSB nibble, - applicable only for Rx translation
Idle  Code-    nibble, - applicable only for Rx translation
D Bit Code-    nibble,
C Bit Code-    nibble,
B Bit Code-    nibble,
A Bit Code-LSB nibble.
              
Each of Busy and Idle Code nibble will have the valid values:
0000 .. FFFF.
              
Each of A,B,C,D Bit Code nibble represents:
0 hex = 0000 = 0
1 hex = 0001 = 1
2 hex = 0010 = A bit
3 hex = 0011 = B bit
4 hex = 0100 = C bit
5 hex = 0101 = D bit
6 hex = 0110 = A bit inverse
7 hex = 0111 = B bit inverse
8 hex = 1000 = C bit inverse
9 hex = 1001 = D bit inverse
A-F hex - not used (invalid values)
              
For MP-104/204 R1:
	   This object represents 3 parameters, by 2 Octets :
Bit  1 = Bit A - OFF Hook for Tx	; Ring for Rx (LSB)
	   Bit  2 = Bit B - OFF Hook for Tx	; Ring for Rx 
	   Bit  3 = Bit C - OFF Hook for Tx	; Ring for Rx 
	   Bit  4 = Bit D - OFF Hook for Tx	; Ring for Rx 
	   Bit  5 = Bit A - ON  Hook for Tx ; Idle for Rx
	   Bit  6 = Bit B - ON  Hook for Tx ; Idle for Rx
	   Bit  7 = Bit C - ON  Hook for Tx ; Idle for Rx
	   Bit  8 = Bit D - ON  Hook for Tx ; Idle for Rx
              
	   Bit  9 = Bit A - OOS State for both Tx and Rx
	   Bit 10 = Bit B - OOS State for both Tx and Rx 
	   Bit 11 = Bit C - OOS State for both Tx and Rx 
	   Bit 12 = Bit D - OOS State for both Tx and Rx 
	   Bit 13 = Spare (always 0)
	   Bit 14 = Spare (always 0)
	   Bit 15 = Spare (always 0)
	   Bit 16 = Spare (always 0)  (MSB)
              
When the object is not applicable, the Octet String will have 0 bytes.

Context

MIB
RAD-Mpmx-MIB
OID
.1.3.6.1.4.1.164.3.1.2.10.1.1.4
Type
column
Access
readwrite
Status
current
Parent
agnSigProfileEntry
Table
agnSigProfileTable
Siblings
5

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agnSigProfileCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the write operation is v…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.1.2.10.1.1.1
agnSigProfileIdx
This attribute indicates the Signaling Profile (1..5). For MP-104/204, only Profile=1 will exist.
columnInteger32.1.3.6.1.4.1.164.3.1.2.10.1.1.2
agnSigProfileRxTx
This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS CH Tx : Signaling to…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.10.1.1.3
agnSigProfileEcanActSignal
Echo Canceller Activation Signal. This object specifies which BIT (A, B, C, or D) and which value (0 or 1) will be used for the echo canceller activation. The inverse value will c…
columnEnumeration.1.3.6.1.4.1.164.3.1.2.10.1.1.5
agnSigProfileEcanRespDelay
Echo Canceller Response Delay. This object specifies the response delay in msec for the activation/deactivation of the echo canceller. The value should be in multiples of 100 msec…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.164.3.1.2.10.1.1.6