agnSSanityCheckStatus
RAD-Mpmx-MIB ·
.1.3.6.1.4.1.164.3.1.2.1.18
Object
scalar
Enumeration
Upon completion of the Sanity check process on the TmpCnfg
this attribute will be set to:
FAIL(2) - when there is at least one error encountered and
possibly some warnings.
WARNING(3) - when there are only warnings.
otherwise, the value will be OK(4).
The value will be UNKNOWN(1) if changes were made in the
TmpCnfg following the last Sanity check.
Context
- MIB
- RAD-Mpmx-MIB
- OID
.1.3.6.1.4.1.164.3.1.2.1.18- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- statAgnGen
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | fail |
3 | warning |
4 | ok |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnSDateFormat This entry indicates the date and time format used for the
agnSDateAndTimeCmd and for the alarm history report. | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.1 |
| agnSAlrStatus Indicates the alarm state in the agent level, i.e. lower
level (card/port) alarms not included.
critical(7) - when there is at least one active (state ON)
critical alar… | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.10 |
| agnSAlrStatusAll Indicates the alarm state of the entire agent, i.e.
including card and port alarms status.
critical(7) - when there is at least one active (state ON)
critical alarm,
… | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.11 |
| agnSMaskedAlrStat Indicates the alarm state in the agent level,[ i.e. lower
level (card/port) alarms not included] including Masked
alarms.
critical(7) - when there is at least one active (state ON… | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.12 |
| agnSMaskedAlrStatAll Indicates the alarm state of the entire agent, i.e.
including card and port alarms status,including
Masked alarms.
critical(7) - when there is at least one active (state ON)
… | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.13 |
| agnSTstStatAll on(3) - when there is at least one test in progress in one
of the agent cards,
otherwise the value will be off(2). | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.14 |
| agnSAlrTable List of agent related alarms and indications for alarms at
system level. | table | - | .1.3.6.1.4.1.164.3.1.2.1.15 |
| agnSClearAlrCmd Setting this attribute to ON, enforce a clear operation on
all the agent(general) events. General alarms are alarms
which are not specific to a card or port. The clear
operation … | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.16 |
| agnSClearAllAlrCmd Setting this attribute to ON, enforce a clear operation on
all MUX alarm events at the levels of agent, slots and ports.
The clear operation will not be applied for masked/inverte… | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.17 |
| agnSNoOfSanityCheckErr This entry indicates the number of errors/warnings discovered
by the last SanityCheck process. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.1.19 |
| agnSDateCmd This entry indicates the current date as it is known by the
agent using its own real-time clock. The format would be as
specified by the agnSDateFormat.
This parameter can be set… | scalar | OctetString | .1.3.6.1.4.1.164.3.1.2.1.2 |
| agnSErrListTable List of errors and warnings found during Sanity Check
process. | table | - | .1.3.6.1.4.1.164.3.1.2.1.20 |
| agnSMaxNoOfCnfg Maximum number of configurations that can be defined and
stored in the MUX.
If the mux has a large capacity, the maximum will be limited
to 254. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.1.21 |
| agnSCnfgTable This table contains an entry per configuration. It indicates
if the configuration is valid. | table | - | .1.3.6.1.4.1.164.3.1.2.1.22 |
| agnSTimeCmd This entry indicates the current time as it is known by the
agent using its own real-time clock.
This parameter can be set for time synchronization between
the NMS and the Agent. | scalar | OctetString | .1.3.6.1.4.1.164.3.1.2.1.3 |
| agnSActiveCnfg This entry specifies the unique identifier of the configuration,
that is currently active and running. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.1.4 |
| agnSEditCnfg This entry indicates the unique identifier of the
configuration that is currently loaded into the tmp working
space for manipulation and update operations. Value of 255
means no… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.1.5 |
| agnSLastCnfgFlipTime This entry indicates the Date & Time of the last flip to the
current configuration at the agent. | scalar | OctetString | .1.3.6.1.4.1.164.3.1.2.1.6 |
| agnSLastCnfgFlipCause This entry describes the flip's cause. | scalar | OctetString | .1.3.6.1.4.1.164.3.1.2.1.7 |
| agnSEditBy This entry indicates which MMI application is working on the
edited config.
The editing phase starts at the first modify operation and
ends after an update(load) operation. | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.8 |
| agnSClkSrc This entry indicates the source of the system clock. | scalar | Enumeration | .1.3.6.1.4.1.164.3.1.2.1.9 |