agnDlciLPrtIdx
RAD-Mpmx-MIB ·
.1.3.6.1.4.1.164.3.1.2.8.1.1.3
Object
column
SNMPv2-SMIInteger32
This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect (for voice switching) LPrtIdx is defined according one of the following possiblities: 1. LSlotIdx is < HSlotIdx. 2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx. 3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.
Context
- MIB
- RAD-Mpmx-MIB
- OID
.1.3.6.1.4.1.164.3.1.2.8.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- agnDlciEntry
- Table
- agnDlciTable
- Siblings
- 16
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agnDlciCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. | column | Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.1 |
| agnDlciRxBc This attribute indicates a unique Rx committed bandwidth on
the user receive line or at the port transmit line. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.10 |
| agnDlciRxBe This attribute indicates a unique Rx excess bandwidth on the
user receive line or at the port transmit line. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.11 |
| agnDlciPriority This attribute indicates a unique priority of the pcv.
1 is the lowest priority and 7 is the highest priority. | column | Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.12 |
| agnDlciStatus This attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as
not connected | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.13 |
| agnDlciSpoofing This object refers to sending of RIP messages:
- yes : RIP messages will be sent ONLY if there is a change in the Net.
- no : RIP messages will be always sent.
This objec… | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.14 |
| agnDlciFunnelEnable This object selects Funnel activation:
- disabled: Funnel operation will be disabled.
The agnDlciTxBe and agnDlciTxBc values are not used for funnel… | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.15 |
| agnDlciRoutingProtocol This object is relevant only when one side of the DLCI is a CL-NMS interface.
It defines which Routing Protocol will be used for management via CL-NMS port.
notApplicable will be … | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.16 |
| agnDlciRowStatus This attribute allows to create/delete a row in this table.
For creating a row, the NMS should set
agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1).
For destroying a row, … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.2.8.1.1.17 |
| agnDlciLSltIdx This attribute indicates a unique slot position where
the card is inserted. This is the Source Slot of the DLCI.
vs=Voice Switching
In the ?004 Unit the entries io6(10)..io1… | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.2 |
| agnDlciLIdx This attribute indicates a unique index for each possible
used DLCI(16..991). This is the Source Side of the DLCI.
0=notApplicable (for voice switching)
LIdx is defined according … | column | Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.4 |
| agnDlciHSltIdx This attribute indicates a unique slot position In the Mux
where the DLCI is routed to - Destination Slot.
For ISDN BRI ports of MX300/30 units:
io1(5) = isdn1(5) and io2(6) =… | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.5 |
| agnDlciHPrtIdx This attribute indicates a unique port number where the DLCI is
routed to - Destination Port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.6 |
| agnDlciHIdx This attribute indicates a unique internal connection DLCI
number where the Source DLCI is routed to - the Destination Side of the DLCI. | column | Integer32 | .1.3.6.1.4.1.164.3.1.2.8.1.1.7 |
| agnDlciTxBc This attribute indicates a unique Tx committed bandwidth on
the user transmit line or at the port receive line. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.8 |
| agnDlciTxBe This attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line. | column | Enumeration | .1.3.6.1.4.1.164.3.1.2.8.1.1.9 |