l3SatResponderOuterPbit
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.14.1.6
Object
column
r/w
Unsigned32
The outer VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
A value of 255 means the marking profile of
l3SatResponderOuterMarkingProfile is used instead of this object.
This object is relevant only when l3SatResponderApplication is
set to l3OverL2(2) and l3SatResponderOuterVlan is not set to
4294967295.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.14.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- l3SatResponderEntry
- Table
- l3SatResponderTable
- Siblings
- 16
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-7
range: 255-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatResponderName A meaningful printable responder name. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.14.1.1 |
| l3SatResponderRouterEntity The number of the router under which the L3 SAT is performed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.10 |
| l3SatResponderLocalAddrType The type of IP address of the L3 SAT responder. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.14.1.11 |
| l3SatResponderLocalAddr The IP address of the L3 SAT responder. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.14.1.12 |
| l3SatResponderL4Port The start of the range of UDP ports that are used in the tests.
Must be a multiple of 16. | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.13 |
| l3SatResponderRouterInterface The ifIndex of the associated router interface. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.14.1.14 |
| l3SatResponderStatus The current status of the generator:
Shutdown - the responder is disabled.
Idle - some of the mandatory attributes were not configured
yet e.g. L2 paramete… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.14.1.15 |
| l3SatResponderLmRxPackets The total number of packets received on all loss measurement
streams. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.2.14.1.16 |
| l3SatResponderDmRxPackets The total number of packets received on all delay measurement
streams. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.2.14.1.17 |
| l3SatResponderRowStatus This object enables creation and deletion of L3 SAT responders. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.14.1.2 |
| l3SatResponderApplication The role of the responder device in the service path - L3 forwarder
or L2 probe. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.14.1.3 |
| l3SatResponderInterface The associated physical or logical port.
This object is relevant only when l3SatResponderApplication is
set to l3OverL2(2). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.14.1.4 |
| l3SatResponderOuterVlan The outer VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no outer VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.5 |
| l3SatResponderOuterMarkingProfile The profile used to mark outer VLAN priority (P-bit) of outgoing
and incoming test and TWAMP packets.
The configured value is the index of the corresponding entry i… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.7 |
| l3SatResponderInnerVlan The inner VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no inner VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.8 |
| l3SatResponderInnerPbit The inner VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
This object is relevant only when l3SatResponderApplication is
set to l3Ov… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.9 |