l3SatReportAvailability
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.3.11.1.9
Object
column
hundredth of percent Unsigned32
The percentage of available time.
The availability is calculated by:
(60*l3SatPeerPerfDuration - l3SatReportUas) * 10000 / (60*l3SatPeerPerfDuration)
This object is relevant only for the performance test. For the other
test type entries the value is zero.
The initial value is zero.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.3.11.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- hundredth of percent
- Parent
- l3SatReportEntry
- Table
- l3SatReportTable
- Siblings
- 36
Syntax
hundredth of percent Unsigned32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatReportIpSize The IP size index of the report.
Allows holding measurements and result per IP size.
One entry for each set IP size in the corresponding
l3SatSessionProfileIpSize. | column | RadTestIpSizeIndex | .1.3.6.1.4.1.164.6.1.15.3.11.1.1 |
| l3SatReportPtdMin The minimum measured packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.10 |
| l3SatReportPtdAverage The average calculated packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.11 |
| l3SatReportPtdMax The maximum measured packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.12 |
| l3SatReportPtdStd The calculated standard deviation of the packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.13 |
| l3SatReportPdvAverage The average calculated packet delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.14 |
| l3SatReportPdvMax The maximum calculated packet delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.15 |
| l3SatReportIpdvAverageFwd The average calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other responde… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.16 |
| l3SatReportIpdvMaxFwd The maximum calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other responde… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.17 |
| l3SatReportIpdvAverageBck The average calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other respond… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.18 |
| l3SatReportIpdvMaxBck The maximum calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other respond… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.19 |
| l3SatReportTestType The sub-test type index of the report.
Allows holding measurements and result per sub-test type.
Entries are created according to the associated configuration in th… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.3.11.1.2 |
| l3SatReportDuplicatedPacketsFwd The number of duplicated packets in the forward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTime… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.20 |
| l3SatReportDuplicatedPacketsBck The number of duplicated packets in the backward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTim… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.21 |
| l3SatReportReorderedPacketsFwd The number of reordered packets in the forward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTimes… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.22 |
| l3SatReportReorderedPacketsBck The number of reordered packets in the backward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTime… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.23 |
| l3SatReportPtdMinFwd The minimum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType i… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.24 |
| l3SatReportPtdAverageFwd The average calculated forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.25 |
| l3SatReportPtdMaxFwd The maximum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType i… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.26 |
| l3SatReportPtdStdFwd The calculated standard deviation of the forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPee… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.27 |
| l3SatReportPtdMinBck The minimum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType … | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.28 |
| l3SatReportPtdAverageBck The average calculated backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.29 |
| l3SatReportResult The result of the sub-test.
The initial value is notApplicable(1).
Upon completion of the sub-test the value changes to passed(2) or
failed(3).
If the test is stopp… | column | RAD-TCRadTestResult | .1.3.6.1.4.1.164.6.1.15.3.11.1.3 |
| l3SatReportPtdMaxBck The maximum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType … | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.30 |
| l3SatReportPtdStdBck The calculated standard deviation of the backward packet transfer
delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPe… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.31 |
| l3SatReportPdvAverageFwd The average calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.32 |
| l3SatReportPdvMaxFwd The maximum calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.33 |
| l3SatReportPdvAverageBck The average calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTy… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.34 |
| l3SatReportPdvMaxBck The maximum calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTy… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.35 |
| l3SatReportValidRxTwampPacketsFwd The number of valid received TWAMP packets in the forward direction.
Timeout (lost) and duplicated packets are not valid.
The PDR is calculated by:
(l3SatReportDupl… | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.36 |
| l3SatReportValidRxTwampPacketsBck The number of valid received TWAMP packets in the backward direction.
Timeout (lost) and duplicated packets are not valid.
The PDR is calculated by:
(l3SatReportDup… | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.37 |
| l3SatReportTxRate The transmission rate that the generator was configured to in the
sub-test. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.4 |
| l3SatReportIrAverage The average calculated information rate.
The initial value is zero. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.5 |
| l3SatReportTxPackets The number of transmitted packets.
The initial value is one. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.6 |
| l3SatReportLostPackets The number of packets lost.
The PLR is calculated by:
(l3SatReportLostPackets / l3SatReportTxPackets)
The initial value is zero. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.7 |
| l3SatReportUas The number of unavailable seconds.
This object is relevant only for the performance test. For the other
test type entries the value is zero.
The init… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.8 |