l3SatGeneratorOuterMarkingProfile
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.11.1.7
Object
The profile used to mark outer VLAN priority (P-bit) of outgoing
and incoming test and TWAMP packets.
The configured value is the index of the corresponding entry in
rad.markingProfileTable.
A value of zero means a fixed marking per
l3SatGeneratorOuterPbit is used instead of this object.
This object is relevant only when l3SatGeneratorApplication is
set to l3OverL2(2) and l3SatGeneratorOuterVlan is not set to
4294967295.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.11.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- l3SatGeneratorEntry
- Table
- l3SatGeneratorTable
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatGeneratorName A meaningful printable generator name. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.11.1.1 |
| l3SatGeneratorRouterEntity The number of the router under which the L3 SAT is performed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.11.1.10 |
| l3SatGeneratorLocalAddrType The type of IP address of the L3 SAT generator. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.11.1.11 |
| l3SatGeneratorLocalAddr The IP address of the L3 SAT generator. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.11.1.12 |
| l3SatGeneratorRouterInterface The ifIndex of the associated router interface. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.11.1.13 |
| l3SatGeneratorStatus The current status of the generator:
Shutdown - the generator is disabled.
Idle - some of the mandatory attributes were not configured
yet e.g. L2 paramete… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.11.1.14 |
| l3SatGeneratorRowStatus This object enables creation and deletion of L3 SAT generators. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.11.1.2 |
| l3SatGeneratorApplication The role of the generator device in the service path - L3 forwarder
or L2 probe. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.11.1.3 |
| l3SatGeneratorInterface The associated physical or logical port.
This object is relevant only when l3SatGeneratorApplication is
set to l3OverL2(2). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.11.1.4 |
| l3SatGeneratorOuterVlan The outer VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no outer VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.11.1.5 |
| l3SatGeneratorOuterPbit The outer VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
A value of 255 means the marking profile of
l3SatGeneratorOuterMarkingProf… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.11.1.6 |
| l3SatGeneratorInnerVlan The inner VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no inner VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.11.1.8 |
| l3SatGeneratorInnerPbit The inner VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
This object is relevant only when l3SatGeneratorApplication is
set to l3Ov… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.11.1.9 |