csmSourceWtrClear
RAD-Clock-MIB ·
.1.3.6.1.4.1.164.6.2.52.5.2.1.10
Object
column
r/w
Enumeration
Setting this object to on, will clear WTR, causing immediate return to recovered source. Upon completion, the value will automatically change to off(2). Default=off(2). After operation is performed, value of csmSourceWtrTimer will be the configured value(not 0).
Context
- MIB
- RAD-Clock-MIB
- OID
.1.3.6.1.4.1.164.6.2.52.5.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- csmSourceEntry
- Table
- csmSourceTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | off |
3 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csmSourceDomainIdx This is the unique CSM Domain index
that the current clock source is referenced to. | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.1 |
| csmSourceStatus Clock Source Status.
physicalFail(2)- Physical interface failure.
monitoringFail(3)- Clock Selection HW failure (SSF = true).
esmcFail(4)- Fail report received via ESMC protocol. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.11 |
| csmSourceTxQL The reported Quality Level(QL)from Clock Selection Module(CSM)
to Clock Source. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.12 |
| csmSourceRxQL The reported Quality Level(QL)Clock Source to Clock Selection Module. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.13 |
| csmSourceEsmcState ESMC Protocol state.
unlock - Messages are not received as expected.
lock- OK.
Applicable only for Ethernet interfaces. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.14 |
| csmSourceEsmcTxInfoFrames Number of informational ESMC messages sent from Clock Selection
Module(CSM) to Clock Source.
Applicable only for Ethernet interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.15 |
| csmSourceEsmcRxInfoFrames Number of informational ESMC messages received by Clock
Selection Module(CSM) .
Applicable only for Ethernet interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.16 |
| csmSourceEsmcFailures Number of times that ESMC messages were not received as expected.
Applicable only for Ethernet interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.17 |
| csmkSourceEsmcTxEventFrames Number of ESMC messages that report status change of the clock source
(csmSourceStatus) that were sent from Clock Selection Module(CSM)
to Clock Source.
Applicable only for Ethern… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.18 |
| csmSourceEsmcRxEventFrames Number of ESMC messages that report status change of the clock source
(csmSourceStatus) that were received by Clock Selection Module(CSM).
Applicable only for Ethernet interfaces. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.19 |
| csmSourceIdx CSM Source running index.
For standard projects Max number of clock sources is 8,
and for non standard projects it is project dependent. | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.2 |
| csmSourceWTRState Wait to restore state.
Use the number (2) to indicate 'running' state,
Use the number (3) to indicate 'inactive' state,
All other numbers can be use to indicate the current WTR ti… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.20 |
| csmSourceRowStatus This object enables creation and deletion of entries
in the csmSourceTable.
It will not be possible to add entries with csmSourceDomainIdx
that doesn't exist in csmDomainTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.2.52.5.2.1.3 |
| csmSourceType Source type. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.4 |
| csmSourceID ID of the clock source.
ID depends on type as follows:
rxPort - ifIndex of the interface configured for the csmSourceIdx.
station - Station ID.
recovered - Recovered ID (agnClkSrc… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.5 |
| csmSourceQL The configured quality level of csmSourceIdx.
Default= ssmBased (type1SsmBased(6)/type2SsmBased(30)/type3SsmBased(43))
according to the type (csmDomainSynchNetType from csmDomainT… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.2.1.6 |
| csmSourcePriority The configured priority. Priority will be used for source selection
when the Quality Levels of the clock sources cannot be used (for example
when Quality Level of some clock sourc… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.7 |
| csmSourceHoldoffTimer Holdoff Timer in msec.
When Holdoff Timer>0, and the current clock source fails (SSF),
timer is started and doesn't trigger the CSM immediately to switch to
another clock source.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.8 |
| csmSourceWtrTimer Wait to Restore (WTR) time in msec.
After failed clock source recovers, in order to prevent frequent
clock source switchings of the CSM due to intermittent defects,
a period of ti… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.2.1.9 |