csmDomainQlMinimum
RAD-Clock-MIB ·
.1.3.6.1.4.1.164.6.2.52.5.1.1.6
Object
column
r/w
Enumeration
This object determines the minimum Quality Level(QL) of the clock which is sent out via station clock connector. QL value is Set according to the defined type in csmDomainSynchNetType. Applicable only when device contains station clock connector.
Context
- MIB
- RAD-Clock-MIB
- OID
.1.3.6.1.4.1.164.6.2.52.5.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- csmDomainEntry
- Table
- csmDomainTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | type1Prc |
2 | type1SsuA |
3 | type1SsuB |
4 | type1Sec |
5 | type1Dnu |
6 | type1SsmBased |
21 | type2Prs |
22 | type2Stu |
23 | type2St2 |
24 | type2Tnc |
25 | type2St3e |
26 | type2St3 |
27 | type2Smc |
28 | type2St4 |
29 | type2Dus |
30 | type2SsmBased |
31 | type2Prov |
41 | type3Unk |
42 | type3Sec |
43 | type3Dnu |
44 | type3SsmBased |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csmDomainIdx This is the unique Clock Selection Module Domain index. | column | Unsigned32 | .1.3.6.1.4.1.164.6.2.52.5.1.1.1 |
| csmDomainSysSourceId System Clock Source ID.
0 = Source Clock is internal.
Max value is Max number of existing Clock sources.
For standard projects Max number of clock sources is 8,
and for non standa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.1.1.10 |
| csmDomainCurrentSourceQl The actual QL of csmDomainCurrentSourceId dependent on
csmDomainSynchNetType. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.11 |
| csmDomainStationOutSourceId The Clock Source ID, which is sent out via station clock connector.
When equals 0, clock Source is internal.
Applicable only when device contains station clock connector. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.1.1.12 |
| csmDomainSysSourceState The system selected clock source state.
freeRun - internal clock is in use.
holdover - incoming reference is in signal fail state (SSF = true).
locked - incoming reference is not … | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.13 |
| csmDomainStationOutSourceState The state of the Clock Source, which is sent out via station
clock connector.
locked - incoming reference to station clock is not in the signal
fail state (SSF = false) and the qu… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.14 |
| csmDomainForceSwitchState The state of the Force Switch.
active - The Force Switch action is active
inActive - The Force Switch action is not active. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.15 |
| csmDomainManualSwitchState The state of the Manual Switch.
active - The Manual Switch action is active
inActive - The Manual Switch action is not active. | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.16 |
| csmDomainForceT4AsT0 Ensure that t0 and t4 are derived from the same source (in case t4 is
not driven from external source while t0 is). | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.17 |
| csmDomainMaxFrequencyDeviation This is the frequency deviation threshold. If the actual input clock
frequency deviation exceeds this threshold, the given synchronization
source is disqualified and the synchron… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.1.1.18 |
| csmDomainDescr The description of the domain | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.164.6.2.52.5.1.1.19 |
| csmDomainRowStatus This object enables creation and deletion of entries
in the csmDomainTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.2.52.5.1.1.2 |
| csmDomainLastSystemSrcClkSwitchReason Reason of the last system source clock switch.
(1) Other
(2) Manual Switch Command
(3) Force Switch Command
(4) Invalid Clock
(5) Better Clock Availability
(255) Not Applicable | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.20 |
| csmDomainLastStationSrcClkSwitchReason Reason of the last station source clock switch.
(1) Other
(2) Manual Switch Command
(3) Force Switch Command
(4) Invalid Clock
(5) Better Clock Availability
(255) Not Applicab… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.21 |
| csmDomainMode This object determines Clock Selection operational mode.
auto = CSM automatically selects the Clock Source.
In this mode, CSM can be configured to work in the csmDomainQlMode
Enab… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.3 |
| csmDomainQlMode This object determines the QL (quality) mode.
enable = clock selection is done according to quality of the clock sources.
For clock sources having same quality, pri… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.4 |
| csmDomainSynchNetType This object determines the network synchronization type applicable to
geographic area.
Each type has possible quality levels (csmDomainCurrentSourceQl).
Upon changing a type valu… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.5 |
| csmDomainExternalCmd An external command .
forced - It will override the currently clock source.
csmDomainExtCmdParam determines the desired clock source.
This clock source will be selected.
This over… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.7 |
| csmDomainExtCmdParam This object determines the required clock source number when
csmDomainExternalCmd is set to forced(3) or manual(4).
When 'forced' value is Set, CSM will switch the clock source
to… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.2.52.5.1.1.8 |
| csmDomainClearStatCounters Setting this object to on, will enforce a clear operation of CSM
statistics Counters. The command will clear statistics from all
sources in csmSourceTable.
Upon completion, the va… | column | Enumeration | .1.3.6.1.4.1.164.6.2.52.5.1.1.9 |