aclAceTCPSetDscp
RAD-ACL-MIB ·
.1.3.6.1.4.1.164.6.1.14.2.1.6.1.17
Object
column
r/w
DscpMark
DSCP value to set in matched packet
Context
- MIB
- RAD-ACL-MIB
- OID
.1.3.6.1.4.1.164.6.1.14.2.1.6.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclAceTCPEntry
- Table
- aclAceTCPTable
- Siblings
- 18
Syntax
DscpMark
- Source
- DscpMark
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclAceTCPSrcAddressType Type of Internet address of aclAceTCPSrcAddress
Only ipV4 and ipv6 are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.1 |
| aclAceTCPSrcPortOp Indicates how a packet's Source TCP port number is
to be compared with aclAceTCPSrcPort and aclAceTCPSrcPortRange | column | UdpTcpPortOp | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.10 |
| aclAceTCPSrcPort The TCP port number to be matched against the packets TCP source port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.11 |
| aclAceTCPSrcPortRange The source port number of the TCP protocol.
If the aclAceTCPSrcPortOp object in the same row is range(6),
this object will be the ending port number of the port range.
This obje… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.12 |
| aclAceTCPDstPortOp Indicates how a packet's destination TCP port number is
to be compared with aclAceTCPDstPort and aclAceTCPDstPortRange | column | UdpTcpPortOp | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.13 |
| aclAceTCPDstPort The TCP port number to be matched against the packets TCP destination port | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.14 |
| aclAceTCPDstPortRange The destination port number of the TCP protocol.
If the aclAceTCPDstPortOp object in the same row is range(6),
this object will be the ending port number of the port range.
This… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.15 |
| aclAceTCPSetMarkingType This object is used only for ACE type 'permit'.
It indicates which priority parameter should be set in matched packet. | column | AceMarkingType | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.16 |
| aclAceTCPSetIpPrecedence IP Precedence value to set in matched packet | column | IpPrecedenceMark | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.18 |
| aclAceTCPSetPbit Pbit (layer two priority) to set in matched packet | column | PbitMark | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.19 |
| aclAceTCPSrcAddress The IP address to match against the packet's source IP address.
The type of this address is determined by the value of the
aclAceTCPSrcAddressType object. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.2 |
| aclAceTCPSrcAddressPrefixLength The length of the CIDR Prefix carried in aclAceTCPSrcAddress | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.3 |
| aclAceTCPDstAddressType Type of Internet address of aclAceTCPDstAddress .
Only ipV4 and ipv6 are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.4 |
| aclAceTCPDstAddress The IP address to match against the packet's destination IP address.
The type of this address is determined by the value of the
aclAceTCPDstAddressType object. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.5 |
| aclAceTCPDstAddressPrefixLength The length of the CIDR Prefix carried in aclAceTCPDstAddress | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.6 |
| aclAceTCPMarkingType Specifies the marking type to be matched. | column | AceMarkingType | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.7 |
| aclAceTCPDscp The DSCP value to match against the packet's DSCP field | column | DscpMark | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.8 |
| aclAceTCPIpPrecedence The IP Precendece value to match against the packet's IP Precendece field | column | IpPrecedenceMark | .1.3.6.1.4.1.164.6.1.14.2.1.6.1.9 |