qtechRrmObjectsAP
QTECH-RRM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.63.1.4
Object
node
No description available.
Context
- MIB
- QTECH-RRM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.63.1.4- Type
- node
- Parent
- qtechRrmMIBObjects
- Siblings
- 3
- Children
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechRrmObjectsGroup | node | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.1 |
| qtechRrmObjectsDot11a | node | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.2 |
| qtechRrmObjectsDot11b | node | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.3 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechRrmAPIfSlotId Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g. | scalar | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.1 |
| qtechRrmAPIfStationSNRCoverageInfoTable This is a table of Signal to Noise ratio Coverage
information on an AP Interface. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.10 |
| qtechRrmAPIfRecommendedRFParametersTable This table list Best Channel,Best TxPowerLevel,
Best RTSThreshold,Best FragmentationThreshold etc
for this AP Interface as determined by RRM. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.11 |
| qtechRrmAPRadioTable ap radio table | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.12 |
| qtechRrmAPIfThroughputParametersTable These are RRM performance related read only parameters
per Airespace AP | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.13 |
| qtechRrmAPSnrBSSIDTable These are stat on ap snr BSSID | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.14 |
| qtechRrmAPName Name assigned to this AP. If an AP is not configured its
factory default name will be ap:<last three byte of
MACAddress> eg. ap:af:12:be | scalar | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.2 |
| qtechRrmAPIfProfileThresholdConfigTable Table of attributes for various thresholds to be
set on each Airespace AP Interface for Load
performance profile , interference performance
profile and Noise performance profile. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.3 |
| qtechRrmAPIfLoadParametersTable These are RRM performance related read only parameters
per Airespace AP | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.4 |
| qtechRrmAPIfChannelInterferenceInfoTable This is a table of channel information like interference
and noise from other 802.11 networks on each channel. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.5 |
| qtechRrmAPIfChannelNoiseInfoTable This is a table of channel information like
interference and noise from other 802.11 networks on
each channel. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.6 |
| qtechRrmAPIfProfileStateTable This is a table of state of interference monitor
on each Airespace AP | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.7 |
| qtechRrmAPIfRxNeighborsTable This is a table of Rx Neighbors for each Airespace AP
with their RSSI value. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.8 |
| qtechRrmAPIfStationRSSICoverageInfoTable This is a table of channel information like interference
and noise from other 802.11 networks on each channel. | table | - | .1.3.6.1.4.1.27514.1.1.10.2.63.1.4.9 |