qtechMplsPsSwitchCondition

QTECH-MPLSOAM-MIB · .1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.11

Object

column Integer32

The following switch initiation criteria exist:
1. an externally initiated command(clear, lockout of protection, 
   forced switch, manual switch);
2. an automatically initiated command(signal fail) associated with
   a protection domain; or
3. a state (wait to restore, no request) of the protection switching
   function.
The followings are switch request priority:
1. clear: This command clears all of the externally initiated switch commands
   listed below.
2. lockout of protection(LoP): Fix the selector position on the working LSP.
   Prevents the selector from switching to the protection LSP when it is
   selecting the working LSP. Switches the selector from the protection to
   the working LSP when it is selecting the protection LSP.
3. forced switch(FS) for working LSP: Switches the selector from the working
   LSP to the protection LSP (unless a higher priority switch request(i.e., LoP)
   is in effect).
4. signal fail: Signal fail(SF) is declared when the source of the protection
   domain enters the LSP defect state by receiving a BDI packet from the return
   LSP or out of band.
5. manual switch(MS): Switches the selector from the working LSP to the
   protection LSP (unless an equal or higher priority switch request
   (i.e., LoP, FS, SF or MS) is in effect). Switches the selector from
   the protection LSP to the working LSP (unless an equal or higher
   priority switch request(i.e., LoP, FS, SF or MS) is in effect).
6. WTR: Wait to restore is only applicable for the revertive mode and applies
   to a working LSP.
7. no request.

Context

MIB: QTECH-MPLSOAM-MIB
OID: .1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.11
Type: column
Access: readonly
Status: current
Parent: qtechMplsPsEntry
Table: qtechMplsPsTable
Siblings: 14

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-9

Related Objects

Sibling Objects

Object	Type	Syntax	OID
qtechMplsPsIndex This is a unique index in the protection group table.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.1`
qtechMplsPsHoldOff In general, if lower layer(e.g., SDH or optical) protection mechanisms are being utilized in conjunction with MPLS layer protection mechanisms, then the lower layers should have a…	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.10`
qtechMplsPsWorkLspState The state of working lsp state lists below: 1: defect state; 2: non-defect state.	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.12`
qtechMplsPsProtLspState The state of protection lsp state lists below: 1: defect state; 2: non-defect state.	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.13`
qtechMplsPsSwitchResult Which lsp is user traffic being transmitted: 1: working-lsp; 2: protection-lsp.	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.14`
qtechMplsPsRowStatus It is used to create and delete a row in this table. 1: active; 2: notInService; 3: notReady; 4: createAndGo; 5: createAndWait; 6: destroy.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.15`
qtechMplsPsGroupName The protection group name.	column	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.2`
qtechMplsPsType The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type, or a packet 1+1 type. 1. In the 1+1 architecture type, a protection LSP is dedicated to each working …	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.3`
qtechMplsPsWorkLspName The name of work-lsp(or work-tunnel).	column	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.4`
qtechMplsPsWorkLspId The ID of work-lsp(or work-tunnel).	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.5`
qtechMplsPsProtectLspName The name of protect-lsp.	column	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.6`
qtechMplsPsProtectLspId The ID of protect-lsp(or protect-tunnel).	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.7`
qtechMplsPsRevertiveMode The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working traffic is being …	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.8`
qtechMplsPsWTR Wait to restore is only applicable for the revertive mode and applies to a working LSP. It prevents reversion back to select the working LSP until the wait to restore timer has ex…	column	Integer32	`.1.3.6.1.4.1.27514.1.1.10.2.93.1.3.1.1.9`