qtechMplsOamEgrDefectType
QTECH-MPLSOAM-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.15
Object
column
Integer32
There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server layer defect, 1 peer maintenance entity defect: 0: no defect; 1: dServer, Any server layer defect arising below the MPLS layer network; 2: dPeerMe, Any peer maintenance entity defect arising outside the MPLS subnetwork; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Excess rate of CV/FFD defect; 7: dUnknown, Unknown defect in the MPLS network.
Context
- MIB
- QTECH-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechMplsOamEgrEntry
- Table
- qtechMplsOamEgrTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechMplsOamEgrIndex This is a unique index in the egress table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.1 |
| qtechMplsOamEgrAutoOvertime The wait-time of adaptability. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.10 |
| qtechMplsOamEgrBDIFreq For CV: the frequency is 1s.
For FFD: the frequency is one of
50ms,100ms,200ms,500ms.
0: 1000ms(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.11 |
| qtechMplsOamEgrEnable The detection of OAM is enabled/disabled on the egress of an LSP.
0: The OAM detection is disabled on the egress;
1: The OAM detection is enabled on the egress. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.12 |
| qtechMplsOamEgrValid 1: stop detection of OAM;
2: start detection of OAM. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.13 |
| qtechMplsOamEgrAvaState If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.14 |
| qtechMplsOamEgrRowStatus It is used to create and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.16 |
| qtechMplsOamEgrLspName The name of static LSP at egress. | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.2 |
| qtechMplsOamEgrLsrId The Ingress LSR ID of an LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.3 |
| qtechMplsOamEgrLspId The ID of an LSP. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.4 |
| qtechMplsOamEgrDetType 0: adaptability;
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.5 |
| qtechMplsOamEgrDetFreq 0: 1000ms(only for cv);
1: 50ms;
2: 100ms;
3: 200ms;
4: 500ms;
5: invalid. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.6 |
| qtechMplsOamEgrRevType The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR
(which is the source of the forward LSP) that there is a defect at the downstream LSP's… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.7 |
| qtechMplsOamEgrRevLspName The name of a return LSP. | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.8 |
| qtechMplsOamEgrAutoEn The adaptability is enabled/disabled.
0: disable;
1: enable. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.93.1.1.3.1.9 |