qtechIPSec2TunInSaEncryptAlgo
QTECH-IPSEC2-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.26
Object
column
QtechEncryptAlgo
The encryption algorithm used by the inbound security association of the IPSec Phase-2 Tunnel.
Context
- MIB
- QTECH-IPSEC2-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.26- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechIPSec2TunnelEntry
- Table
- qtechIPSec2TunnelTable
- Siblings
- 32
Syntax
QtechEncryptAlgo
- Source
- QtechEncryptAlgo
- Base type
Enumeration
Values & Constraints
Type Values
0 | none |
2 | desCbc |
3 | threedesCbc |
12 | aesCbc |
128 | sm1Cbc |
2147483647 | invalidAlg |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechIPSec2TunIfIndex The interface index( the ifIndex of ifTable ). | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.1 |
| qtechIPSec2TunLocalAddr The IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.10 |
| qtechIPSec2TunRemoteAddr The IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.11 |
| qtechIPSec2TunLocalHostname The Hostname of the local peer for the IPSec Phase-2
Tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.12 |
| qtechIPSec2TunRemoteHostname The Hostname of the remote peer for the IPSec Phase-2
Tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.13 |
| qtechIPSec2TunKeyType The key negotiate mode used by the IPSec Phase-2 Tunnel. | column | QtechIPSec2NegoType | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.14 |
| qtechIPSec2TunEncapMode The encapsulation mode used by the IPSec Phase-2 Tunnel. | column | QtechEncapMode | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.15 |
| qtechIPSec2TunInitiator The initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.16 |
| qtechIPSec2TunLifeSize The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
2147483647 is defined as invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.17 |
| qtechIPSec2TunLifeTime The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.18 |
| qtechIPSec2TunRemainTime The remain time of SA in seconds. 2147483647 is defined as invalid
value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.19 |
| qtechIPSec2TunnelTrafficIndex Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.2 |
| qtechIPSec2TunActiveTime The duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.20 |
| qtechIPSec2TunCreateTime The Time Stamp when the IPSec Phase-2 Tunnel created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.21 |
| qtechIPSec2TunRemainSize The remain LifeSize of SA in kilobytes. 2147483647 is defined as
invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.23 |
| qtechIPSec2TunTotalRefreshes The total number of security association refreshing performed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.24 |
| qtechIPSec2TunCurrentSaInstances The number of security associations which are currently active
or expiring. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.25 |
| qtechIPSec2TunInSaAhAuthAlgo The authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel. | column | QtechAuthAlgo | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.27 |
| qtechIPSec2TunInSaEspAuthAlgo The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel. | column | QtechAuthAlgo | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.28 |
| qtechIPSec2TunDiffHellmanGrp The Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel. | column | QtechDiffHellmanGrp | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.29 |
| qtechIPSec2TunIndex The index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.3 |
| qtechIPSec2TunOutSaEncryptAlgo The encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel. | column | QtechEncryptAlgo | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.30 |
| qtechIPSec2TunOutSaAhAuthAlgo The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel. | column | QtechAuthAlgo | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.31 |
| qtechIPSec2TunOutSaEspAuthAlgo The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel. | column | QtechAuthAlgo | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.32 |
| qtechIPSec2TunMapName The Map name used by this IPSec tunnel. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.33 |
| qtechIPSec2TunSeqNum The sequence number of policy used by this IPSec tunnel. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.34 |
| qtechIPSec2TunStatus The status of the IPSec Tunnel. | column | QtechIPSec2TunnelState | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.35 |
| qtechIPSec2TunIKETunnelIndex The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.5 |
| qtechIPSec2TunnelAhOutSaIndex Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.6 |
| qtechIPSec2TunnelAhInSaIndex The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.7 |
| qtechIPSec2TunnelEspOutSaIndex The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.8 |
| qtechIPSec2TunnelEspInSaIndex Description. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.108.1.1.1.9 |