zxr10MplsL2vpnPwSigCwStatus
PWE3MGR ·
.1.3.6.1.4.1.3902.3.104.8.2.1.1.7
Object
column
MplsL2vpnPwCwStatus
Indicates the status of the control word (CW) negotiation
based on the local configuration and the indications received
from the peer node.
waitingForNextMsg(1) indicates that the node is waiting for
another label mapping from the peer.
sentWrongBitErrorCode(2) indicates that the local node has
notified the peer about a mismatch in the C-bit.
rxWithdrawWithWrongBitErrorCode(3) indicates that a withdraw
message has been received with the wrong C-bit error code.
illegalReceivedBit(4) indicates a C-bit configuration with
the peer which is not compatible with the PW type.
cwPresent(5) indicates that the CW is present for this PW:
If signaling is used - the C-bit is set and agreed between the
nodes, and for manually-configured PW the local configuration
requires the use of the CW.
cwNotPresent(6) indicates that the CW is not present for
this PW: If signaling is used - the C-bit is reset and agreed
between the nodes, and for manually-configured PW the local
configuration requires that the CW not be used.
notYetKnown(7) indicates that a label mapping has not yet
been received from the peer.
Context
- MIB
- PWE3MGR
- OID
.1.3.6.1.4.1.3902.3.104.8.2.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zxr10MplsL2vpnPWSigEntry
- Table
- zxr10MplsL2vpnPWSigTable
- Siblings
- 23
Syntax
MplsL2vpnPwCwStatus
- Source
- MplsL2vpnPwCwStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | waitingForNextMsg |
2 | sentWrongBitErrorCode |
3 | rxWithdrawWithWrongBitErrorCode |
4 | illegalReceivedBit |
5 | cwPresent |
6 | cwNotPresent |
7 | notYetKnown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxr10MplsL2vpnPWSigRemoteRouterId Router ID of remote PE | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3902.3.104.8.2.1.1.1 |
| zxr10MplsL2vpnPWSigLocalGroupId Used in the Group ID field sent to peer within the maintenance protocol used
for PW setup. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.10 |
| zxr10MplsL2vpnPWSigLocalCbit Local configuration of the control word. | column | MplsL2vpnPWCbit | .1.3.6.1.4.1.3902.3.104.8.2.1.1.11 |
| zxr10MplsL2vpnPWSigLocalIfMtu Locally supported MTU size over the interface associated with the PW | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.12 |
| zxr10MplsL2vpnPWSigLocalIfName Name of local interface that PW has been configured on | column | OctetString | .1.3.6.1.4.1.3902.3.104.8.2.1.1.13 |
| zxr10MplsL2vpnPWSigRemoteEncapsulationType Remote Mpls L2vpn PW encapsulation type | column | MplsL2vpnPWType | .1.3.6.1.4.1.3902.3.104.8.2.1.1.14 |
| zxr10MplsL2vpnPWSigRemoteGroupId Used in the Group ID field for PW setup. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.15 |
| zxr10MplsL2vpnPWSigRemoteIfMtu Remote supported MTU size over the interface associated with the PW | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.16 |
| zxr10MplsL2vpnPWSigRemoteIfName Name of Remote interface that PW has been configured on | column | OctetString | .1.3.6.1.4.1.3902.3.104.8.2.1.1.17 |
| zxr10MplsL2vpnPWSigRemotePwStatusCap Indicates the remote node capability to advertise the
PW status notification.
notAppicable SHOULD be reported if the local node is not
capable of accepting the status notification… | column | MplsL2vpnPwRemoteStatusCap | .1.3.6.1.4.1.3902.3.104.8.2.1.1.18 |
| zxr10MplsL2vpnPWSigLocalPwStatusCap Indicates the remote node capability to advertise the
PW status notification.
notAppicable SHOULD be reported if the local node is not
capable of accepting the status notification… | column | MplsL2vpnPwLocalStatusCap | .1.3.6.1.4.1.3902.3.104.8.2.1.1.19 |
| zxr10MplsL2vpnPWSigVcId Mpls L2vpn VCID value on a PE | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.2 |
| zxr10MplsL2vpnPWSigNegPwStatusCap result of pw status enable after negotiate | column | MplsL2vpnPwNegStatusCap | .1.3.6.1.4.1.3902.3.104.8.2.1.1.20 |
| zxr10MplsL2vpnPWSigLocalPwPreForwarding Local pw priority forwarding status | column | MplsL2vpnPWPreForwarding | .1.3.6.1.4.1.3902.3.104.8.2.1.1.21 |
| zxr10MplsL2vpnPWSigRemotePwPreForwarding Remote pw priority forwarding status | column | MplsL2vpnPWPreForwarding | .1.3.6.1.4.1.3902.3.104.8.2.1.1.22 |
| zxr10MplsL2vpnPWSigNegoPwPreForwarding result of negotiate of pw priority forwarding status | column | MplsL2vpnPWPreForwarding | .1.3.6.1.4.1.3902.3.104.8.2.1.1.23 |
| zxr10MplsL2vpnPWSigMacwithdrawCal mac withdraw times calculate | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.24 |
| zxr10MplsL2vpnPWSigPwName Name specified for each configured MPLS L2VPN PW | column | OctetString | .1.3.6.1.4.1.3902.3.104.8.2.1.1.3 |
| zxr10MplsL2vpnPWSigLocalEncapsulationType Mpls L2vpn PW encapsulation type | column | MplsL2vpnPWType | .1.3.6.1.4.1.3902.3.104.8.2.1.1.4 |
| zxr10MplsL2vpnPWSigSignalingType Mpls L2vpn PW signaling type | column | MplsL2vpnPWSignalingType | .1.3.6.1.4.1.3902.3.104.8.2.1.1.5 |
| zxr10MplsL2vpnPWSigOperStatus Mpls L2vpn PW operation status | column | MplsL2vpnPWOperStatus | .1.3.6.1.4.1.3902.3.104.8.2.1.1.6 |
| zxr10MplsL2vpnPWSigLocalLabel PW internal label locally allocated.If the label is not yet known,
the object should return a value of 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.8 |
| zxr10MplsL2vpnPWSigRemoteLabel PW internal label allocated by remote peer.If the label is not yet known,
the object should return a value of 0xFFFFFFFF. | column | Unsigned32 | .1.3.6.1.4.1.3902.3.104.8.2.1.1.9 |