pwEnetEntry
PW-ENET-STD-MIB ·
.1.3.6.1.2.1.180.1.1.1
Object
row
This table is indexed by the same index that was created
for the associated entry in the PW generic table in the
PW-STD-MIB module.
The pwIndex and the pwEnetPwInstance are used as indexes
to allow multiple VLANs to exist on the same PW.
An entry is created in this table by the agent for every
entry in the pwTable with a pwType of 'ethernetTagged'
or 'ethernet'. Additional rows may be created by the
operator or the agent if multiple entries are required for
the same PW.
The value of pwEnetPwInstance can be arbitrarily selected
to make the row unique; however, implementations that know
the VLAN field value when the row is created MAY use the
value of the VLAN itself for better readability and
backward compatibility with older versions of this MIB
module.
This table provides Ethernet port mapping and VLAN
configuration for each Ethernet PW.
All read-create objects in this table MAY be changed at any
time; however, change of some objects (for example,
pwEnetVlanMode) during the PW forwarding state MAY cause traffic
disruption.
Manual entries in this table SHOULD be preserved after a
reboot, and the agent MUST ensure the integrity of those
entries. If the set of entries of a specific row is found to
be inconsistent after reboot, the PW pwOperStatus MUST be
declared as notPresent(5).
Context
- MIB
- PW-ENET-STD-MIB
- OID
.1.3.6.1.2.1.180.1.1.1- Type
- row
- Status
- current
- Parent
- pwEnetTable
- Table
- pwEnetTable
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwEnetPwInstance If multiple rows are mapped to the same PW, this index is
used to uniquely identify the individual row.
If the value of the VLAN field is known at the time of
row creation, the va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.180.1.1.1.1 |
| pwEnetPwVlan This object defines the (service-delimiting) VLAN field
value on the PW. The value 4095 MUST be used if the
object is not applicable, for example, when mapping all
packets from a… | column | Q-BRIDGE-MIBVlanIdOrAnyOrNone | .1.3.6.1.2.1.180.1.1.1.2 |
| pwEnetVlanMode This object indicates the mode of VLAN handling between the
port or the virtual port associated with the PW and the
PW encapsulation.
- 'other' indicates an operati… | column | Enumeration | .1.3.6.1.2.1.180.1.1.1.3 |
| pwEnetPortVlan This object defines if the mapping between the original port
(physical port or VPLS virtual port) to the PW is VLAN based
or not. In case of VLAN mapping, this object indicates t… | column | Q-BRIDGE-MIBVlanIdOrAnyOrNone | .1.3.6.1.2.1.180.1.1.1.4 |
| pwEnetPortIfIndex This object is used to specify the ifIndex of the Ethernet
port associated with this PW for point-to-point Ethernet
service, or the ifIndex of the virtual interface of the
VPLS in… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.180.1.1.1.5 |
| pwEnetPwIfIndex If the PW is modeled as an ifIndex in the ifTable, this
object indicates the value of the ifIndex representing the
Ethernet PW on the PSN side in the Etherlike-MIB. Note that
thi… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.180.1.1.1.6 |
| pwEnetRowStatus This object enables creating, deleting, and modifying this
row. | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.180.1.1.1.7 |
| pwEnetStorageType This object indicates the storage type of this row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.180.1.1.1.8 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| PW-STD-MIBpwIndex A unique index for the conceptual row identifying a PW within
this table. | column | PW-TC-STD-MIBPwIndexType | .1.3.6.1.2.1.10.246.1.2.1.1 |
| pwEnetPwInstance If multiple rows are mapped to the same PW, this index is
used to uniquely identify the individual row.
If the value of the VLAN field is known at the time of
row creation, the va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.180.1.1.1.1 |