opmen99810bQosSMAC

PRIVATETECH-OP-MEN99810B-MIB · .1.3.6.1.4.1.5205.2.94.2.14.9.2.1.9
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.

Context

MIB
PRIVATETECH-OP-MEN99810B-MIB
OID
.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.9
Type
column
Access
readwrite
Status
current
Parent
opmen99810bQosQceEntry
Table
opmen99810bQosQceTable
Siblings
38

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
opmen99810bQosQceIndexcolumnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.1
opmen99810bQosDMACType
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.10
opmen99810bQosFrameType
Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
columnEnumeration.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.11
opmen99810bQosMacEtherType
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.12
opmen99810bQosLLCSSAPAddr
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.13
opmen99810bQosLLCDSAPAddr
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.14
opmen99810bQosLLCControl
Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.15
opmen99810bQosSNAPPID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.16
opmen99810bQosIpv4Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.17
opmen99810bQosIpv4ProtocolValue
Ipv4 Protocol is Other. range: 0-255 default: 0.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.18
opmen99810bQosIpv4ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.19
opmen99810bQosQceID
If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.2
opmen99810bQosIpv4ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.20
opmen99810bQosIpv4ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.21
opmen99810bQosIpv4ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.22
opmen99810bQosIpv4SourceIp
Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.23
opmen99810bQosIpv4SourceMask
Specific Source IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.24
opmen99810bQosIpv4IPFragment
IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
columnEnumeration.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.25
opmen99810bQosIpv4DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.26
opmen99810bQosIpv6Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.27
opmen99810bQosIpv6ProtocolValue
when IPv6 protocol is Other , range: 0-255.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.28
opmen99810bQosIpv6ProtocolUDPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.29
opmen99810bQosQceNextID
If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.3
opmen99810bQosIpv6ProtocolUDPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.30
opmen99810bQosIpv6ProtocolTCPSport
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.31
opmen99810bQosIpv6ProtocolTCPDport
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.32
opmen99810bQosIpv6SourceIp
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.33
opmen99810bQosIpv6SourceMask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.34
opmen99810bQosIpv6DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.35
opmen99810bQosActionClass
QoS class: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.36
opmen99810bQosActionDPL
DP Valid Drop Precedence Level can be (0-3) or 4: Default.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.37
opmen99810bQosActionDSCP
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
columnInteger32.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.38
opmen99810bQosQceRowStatus
1: active2: notInservice 4: destroy
columnEnumeration.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.39
opmen99810bQosQcePortMembers
Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.4
opmen99810bQosQceTag
Value of Tag field can be 'Any', 'Untag' or 'Tag'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.5
opmen99810bQosQceVID
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.6
opmen99810bQosPCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.7
opmen99810bQosDEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.5205.2.94.2.14.9.2.1.8