opmen99810bACLACERateLimiter
PRIVATETECH-OP-MEN99810B-MIB ·
.1.3.6.1.4.1.5205.2.94.2.9.3.2.1.12
Object
column
r/w
Integer32
default: 0, 0: Disable range : 0 - 12
Context
- MIB
- PRIVATETECH-OP-MEN99810B-MIB
- OID
.1.3.6.1.4.1.5205.2.94.2.9.3.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- opmen99810bACLACEEntry
- Table
- opmen99810bACLACETable
- Siblings
- 49
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| opmen99810bACLACEIndex | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.1 |
| opmen99810bACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.10 |
| opmen99810bACLACEMirror default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored. | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.11 |
| opmen99810bACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.13 |
| opmen99810bACLACEVLAN8021QTagged Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allow… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.14 |
| opmen99810bACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.15 |
| opmen99810bACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.16 |
| opmen99810bACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.17 |
| opmen99810bACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.18 |
| opmen99810bACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address.
ran… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.19 |
| opmen99810bACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.2 |
| opmen99810bACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.20 |
| opmen99810bACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 4 | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.21 |
| opmen99810bACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.22 |
| opmen99810bACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1:… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.23 |
| opmen99810bACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.24 |
| opmen99810bACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.25 |
| opmen99810bACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.26 |
| opmen99810bACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.27 |
| opmen99810bACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.28 |
| opmen99810bACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.29 |
| opmen99810bACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.3 |
| opmen99810bACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.30 |
| opmen99810bACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.32 |
| opmen99810bACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.33 |
| opmen99810bACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.34 |
| opmen99810bACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.36 |
| opmen99810bACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.37 |
| opmen99810bACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.38 |
| opmen99810bACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is s… | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.39 |
| opmen99810bACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.4 |
| opmen99810bACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.40 |
| opmen99810bACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.41 |
| opmen99810bACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.42 |
| opmen99810bACLACESourcePortMax Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65536 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.43 |
| opmen99810bACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.44 |
| opmen99810bACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.45 |
| opmen99810bACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.46 |
| opmen99810bACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.47 |
| opmen99810bACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.48 |
| opmen99810bACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.49 |
| opmen99810bACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.5 |
| opmen99810bACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.50 |
| opmen99810bACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.51 |
| opmen99810bACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.6 |
| opmen99810bACLACERowStatus 1: active
2: notInservice
4: destroy
5: undo | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.66 |
| opmen99810bACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.7 |
| opmen99810bACLACEAction default: 1,
0: Deny
1: Permit | column | Enumeration | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.8 |
| opmen99810bACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.94.2.9.3.2.1.9 |