gel2esw26kACLACEArpFlagsArpSmac
PRIVATETECH-GEL2ESW26K-MIB ·
.1.3.6.1.4.1.5205.2.54.2.9.3.2.1.23
Object
column
r/w
Integer32
Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. 2: Any - Don't care. 3: No data. range : 0 - 2
Context
- MIB
- PRIVATETECH-GEL2ESW26K-MIB
- OID
.1.3.6.1.4.1.5205.2.54.2.9.3.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- gel2esw26kACLACEEntry
- Table
- gel2esw26kACLACETable
- Siblings
- 49
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gel2esw26kACLACEIndex | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.1 |
| gel2esw26kACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.10 |
| gel2esw26kACLACEMirror default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.11 |
| gel2esw26kACLACERateLimiter default: 0,
0: Disable
range : 0 - 16 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.12 |
| gel2esw26kACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.13 |
| gel2esw26kACLACEVLAN8021QTagged Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allow… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.14 |
| gel2esw26kACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.15 |
| gel2esw26kACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.16 |
| gel2esw26kACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.17 |
| gel2esw26kACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.18 |
| gel2esw26kACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
rang… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.19 |
| gel2esw26kACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.2 |
| gel2esw26kACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.20 |
| gel2esw26kACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.21 |
| gel2esw26kACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.22 |
| gel2esw26kACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.24 |
| gel2esw26kACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.25 |
| gel2esw26kACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.26 |
| gel2esw26kACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.27 |
| gel2esw26kACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.28 |
| gel2esw26kACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.29 |
| gel2esw26kACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.3 |
| gel2esw26kACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.30 |
| gel2esw26kACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.32 |
| gel2esw26kACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.33 |
| gel2esw26kACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.34 |
| gel2esw26kACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.36 |
| gel2esw26kACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.37 |
| gel2esw26kACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.38 |
| gel2esw26kACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is s… | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.39 |
| gel2esw26kACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.4 |
| gel2esw26kACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.40 |
| gel2esw26kACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.41 |
| gel2esw26kACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.42 |
| gel2esw26kACLACESourcePortMax Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.43 |
| gel2esw26kACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.44 |
| gel2esw26kACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.45 |
| gel2esw26kACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.46 |
| gel2esw26kACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.47 |
| gel2esw26kACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.48 |
| gel2esw26kACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.49 |
| gel2esw26kACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.5 |
| gel2esw26kACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.50 |
| gel2esw26kACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.51 |
| gel2esw26kACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.6 |
| gel2esw26kACLACERowStatus 1: active
2: notInservice
4: destroy
5: undo | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.66 |
| gel2esw26kACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.7 |
| gel2esw26kACLACEAction default: 1,
0: Deny
1: Permit | column | Integer32 | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.8 |
| gel2esw26kACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.9 |